Spring Over Perches

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 14, 2004
Threads
232
Messages
3,965
Location
Virginia Beach, VA
Well, I was fooling around with the brakes on my piggy yesterday and I noticed that both axles already have the spring over perches welded on. 1st question: They didn't come this way, did they? Also, I found some junkyard style paint pen writing on one of the axles which got me thinking that maybe these axles came from a sprung over rig. This may be the jumpstart to me springing over the piggy but I also wanted to know how to tell if the cut and turn for the front axle has been done. Also, is the highsteer kit I keep hearing about neccesary or is it just better
Thanks for the Info
Dan

PS, here is a current pic
https://forum.ih8mud.com/attachment.php?attachmentid=19154
 
Last edited:
Dan- the 55 has different bumpstop perches on them than a 40 does- they're square and flat, and too short to be used for a spring over. The front axle should have the pinion pointing at the transfer case with a CV joint at the case if done correctly, if not, the angles of the transfer case will be different. you should also beable to tell from welds on the knuckles, steering stops and shock mounts. The other thing that might cause some problems is your V8 swap- you might not have enough driveshaft to beable to run a front driveshaft at the angles required.

If you want, we'll take a look at it this afternoon- I'm outta class around 1500.
 
Brian, Sounds good, I sent you a PM for this afternoon, thanks for the info.
Dan
 
if you put a rockbox in there you'll be able to have enough drive shaft :grinpimp: Like you need a reason for a rock box... or dual transfer cases
 
TonkaC said:
if you put a rockbox in there you'll be able to have enough drive shaft :grinpimp: Like you need a reason for a rock box... or dual transfer cases

In this case, yes, dual 'cases would be the best bet. It actually does have SOA perches on it, but it'd be 2WD until there was more length....
:beer:
 
Back
Top Bottom