Sporadically Bouncing Tach '94

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 28, 2006
Threads
19
Messages
186
Location
State of Limbo
Guys, I have searched here, but don't find this exact problem described :
I have a '94 w/ 183k . Owned for the past 5yrs<bought w/80k> Modified w/ 33''s, OME 2.5 heavy, Slee speedo correction gearbox and various other goodies all at the same time<4yrs ago >.
My tach <independent of actual engine speed> acts up w/ a random infrequency by 'bouncing' + or - 500rpm while at speed<cruise activated>. It does settle back on its own too.
Any ideas as to what might be happening or how to fix?

Thx !
:cheers:
 
Bump as I'm interested in this as well...Just started noticing that my '97 LX with ~122K miles is starting to get a bouncy tach...Constant speed and every so often the tach will bounce +/- a few hundred rpm :frown:
 
I read this post and just tonight I was idling for about 10 minutes and the tach would jump up a few hundred RPMs and go back down it would do it about every 30 to 40 seconds. Good question. Where's all the "Professional" 80's owners at when a good question comes up?
 
My 1996 at 127k miles has been known to do this every know and then. I believe I had seen this mentioned before after a search and I think it is somewhat common. I consider it a character trait of the Cruiser.

Edit: Do an advanced search in this forum for "tachometer" in titles only and you will find several threads with the same issue. No concrete solutions though, sorry.
 
Last edited:
I did the search for "Tachometer' only as suggested..now I have more options to read.........
I will say that on one multi-post, people had mentioned it seems to be happening only when cold outside. I have both cold AND wet tonite which is interesting to say the least........

Thanks to all who have posted....keep the ideas coming!

:cheers:
 
Old thread... I know...

I'm getting this in my 96 as well, I remember having a similar issue in my 4runner a few years ago, and it turned out to be the ground to the igniter. The little metal frame that holds it to the body is the ground, and after a while, rust, and corrosion builds up under it, causing sporadic grounding. It didnt affect the actual engine speed, just the tach reading. These 80's I believe have an ignition control module... would that basically be the same thing as an igniter in my 4runner? and does it ground the same way? Wife just took off in it, so I cant go out and look right now.


ETA: After a quick peak on rockauto... they list the igniter as an ICM as well, So I'm guessing its the same deal.
 
Back
Top Bottom