Spark plugs for 4.5

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Snowwolf;

They probably will work, but keep in mind that most of use NGK stock plugs. If u go this route with the Bosch, keep us posted on how well the engine performs.

...
 
Don't waste your money. Get the standard NGK or ND plugs and change every 30k, or altenatively get the platnium NGK or ND and change every 60k.
 
ebay is denied at work for me.
So no idea what you posted but I used the bosch platinum (not the 23 tipped rice boy s***) single electrode basics and they work well, just went to the stock type ngk, no noticeable difference in performance between the two.
of course mine is a 92 3FE but still should be about the same.
Dave
 
Time to call CDan....American Toyota. See the banner ad at the top of the screen for the number.
 
FWIW:

I have those exact plugs in my 94. They perform well...quick starts at -25' C (-14F). Gas mileage seems to be the same as everyone else is reporting. On the other hand, PO installed them, so I have nothing to compare them with. Based on all that, save your money and go with the plugs that the experts on this site recommend. Their advise has proven flawless so far! :)
 
Don't you have an owner's manual? Not an FSM (which of course you should also have), just the plain old owner's manual that lives in the glove box. It's the definitive resource for these types of questions.

Curtis
 
I did think about looking in the owners manual, but I had Lexus SC400 before I had the LC and when I had the service done at the Toyota garage, they charged £20 each and it had 8 cylinders :-( and just assumed if I went to the Toyota garage, the plugs would be the same price for the LC
 
Has anybody tried the iridium plugs. I keep hearing amazing things in ATV and snowmobiles with these plugs. Or is it more hype, and just feed cdans pooch.

Jay
 
The OEM plug is a Denso K16R-U, Toyota part number 90919-01176. Current suggested list price $2.22 a rattle.


I get my plugs from Dan, costs less than $12 US for the whole set, just standard copper plugs, I change them out every 30K, and they look good when they come out, look at iridium or platinum if you want longer service intervals, theses metals do not erode as quickly.
 
I did think about looking in the owners manual, but I had Lexus SC400 before I had the LC and when I had the service done at the Toyota garage, they charged £20 each and it had 8 cylinders :-( and just assumed if I went to the Toyota garage, the plugs would be the same price for the LC

Why would you have to go to the Toyota garage?

I'm just saying that the owner's manual will list the part #'s for the correct Denso and/or NGK plugs. Then buy them wherever you want.

Curtis
 
i was about to get the double one because i didn't want to mess with the gap, if you use these let me know how it works out for you.
 
i was about to get the double one because i didn't want to mess with the gap, if you use these let me know how it works out for you.

the <$2 factory Denso plugs come pre-gaped
 
i use DENSO #90919-01180-83 / PK20R8 on my '93.
 
go NGK... Denso... Everything else is a crap shoot.
 
Factory plugs from Dan. Pregapped, and he always sends me something hand made with my shipments. Last time I believe it was an aqua pot holder he'd knitted himself with little lace fringe. Kinda strange I know, but he means well.

DougM
 
Aqua pot holder? like this?


roachclip.jpg



<snicker>
 
Back
Top Bottom