soa with 2" lift???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 2, 2004
Threads
81
Messages
602
Location
Western Slope, CO
I currently have a 2" rough country spring lift, considering doing a soa. would this be too much with my current springs? also I have stock steering setup with 34X10.50 ltbs would now be a good time to do a power steering conversion? I have a 74 FJ40. Also I would use stock springs but came this way from the PO, thanks
 
Post a 'wanted' for some stock springs, lots of people have them around. Keep an eye on your local ads too. Watch out for ones in which one leaf has worn halfway through the next leaf - you prob'ly don't want ones like that. You'll get a much better ride with them than with the Rough country (aptly named) springs and the SOA will lift your truck about 5" with no help from aftermarket springs..
 
wtmtnterror said:
I currently have a 2" rough country spring lift, considering doing a soa. would this be too much with my current springs? also I have stock steering setup with 34X10.50 ltbs would now be a good time to do a power steering conversion? I have a 74 FJ40. Also I would use stock springs but came this way from the PO, thanks
With a SOA you will probly want bigger tires, So I think its always a good time for Power steering :D , Agreed on the stock springs, Thats what I run with 35's, I couuld easily fit 37's with possibly some rubbing.
Good luck :cheers:
 
Any time is a good for power steering if you wheel the rig. I've got a set of stock springs of a '66, at least I think I do. If you're close to Kansas, come get 'em. I would think a SOA with 2" springs would a scary ride but I'm sure it's been done at least once.
 
It's been done , works very well . Alcans . just to give you a reference , it measures 22" on the front shock mount c to c on level ground. Give yours a tape and see what a soa on stock springs is c to c on the front shock mounts?? , anyone with soa and stockers please ?
I agree it is tall for 36's but it is just right for 39's( in the future) and a little wb additions I did. I think it could be lower but I can't beat the cruiser axle's that hard anyway and it is just right for 60's.
 
Thanks for the input guys, I was looking at buying the housing from cruiser outfitters, does anyone make a complete kit for this process? I'm thinking that I will want to change my springs, they are indeed "Rough." Also thinking that I will have to change my hangers, guess this is a good time to do a shackle reversal, damn this is gonna add up quick! :eek:
 
wtmtnterror said:
Thanks for the input guys, I was looking at buying the housing from cruiser outfitters:
Kurt is a great guy, He wont steer you wrong, Good luck! :cheers: Just ask his opinion, He is the MAN! :popcorn:
 
peesalot said:
It's been done , works very well . Alcans . just to give you a reference , it measures 22" on the front shock mount c to c on level ground. Give yours a tape and see what a soa on stock springs is c to c on the front shock mounts?? , anyone with soa and stockers please ?
.
I have the stock spring and SOA, However I dont know what you want me to measure?!? ...Too much beer, Gimme a sec..... :doh: K...I have 24" on the driver and 23.5" on the pass. I have a sweet shock mount that was made to clear the stock steering arm before I did the PS.
Good luck :cheers:
 
I did mine with four inch lift springs, I did take out the two bottom leafs in the front, and one in the rear, the ride is great, much softer than stock plus they're alittle longer spring for better flex.

My .02$
 
peesalot said:
what ???? what size shackles you got ???? if you got stock fj40 springs and standard soa then no way it is 24 from stock upper mount to stock lower mount?
I had the bolt on type of SR kit, When they did the SOA they reused the rear shackle hanger, so it center sits about 1.5" below the frame, I am unsure how your is, I have seen alot that put a pilot through the frame, I also have the regular size greasable shackles.
I will try to find some pic's, I know I have some at home...If needed :cool:
Have fun :cheers:
 
peesalot said:
how tall is that rig ??? like from bottom of frame rail under driver to ground ?
That is a good question, I think its around28-29", I will have to measure it as well, I do remember the dia plate steps are at 35" I also know I still have 2-4" more I could raise it before Im too tall for then Utah State GVWR.
Have fun
 
Last edited:
I have also heard of people putting in mini truck cv's to help the driveline angle, would this eliminate getting the axel turned? this is mainly to correct the severe angle right?
 
Back
Top Bottom