Sm465 ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 14, 2006
Threads
123
Messages
1,108
Location
Central Cali
How easy does this bolt up to the 77 fj40 ?

Sm465 4sp manual transmission with granny first. 10 spline output shaft .

found a pretty good deal, i think ? $50. or is this alot of work ? and worth the work ? is it a good deal ?

Thanks in advance for the info ...
 
2badfjs said:
you will also need a three speed bell housing from a cruiser.


That's what I thought....


If you get the bell housing then you also need to get the adapter plate from AA for the engine to tranny also :confused:
 
Yea its all stock stuff now, 4 speed, 2f etc ..

this sounds like may be alot of work ..

how about the sm420 ? or is that the same ?
is one better then the other ?

THANKS FOR THE ADVICE/INFO .. ONE FOR YA ! :beer:
 
my64fj40 said:
That's what I thought....


If you get the bell housing then you also need to get the adapter plate from AA for the engine to tranny also :confused:

thats what i did
read this one hundred times http://www.root45.com/SM465Orion/
it's the trany to t-case adapter thats the big $$

i was fortunate and got my sm and adapter free :D

the three spd b/h will let the sm bolt right up.
 
FJ40 MNTCRZR said:
Yea its all stock stuff now, 4 speed, 2f etc ..

this sounds like may be alot of work ..

how about the sm420 ? or is that the same ?
is one better then the other ?

THANKS FOR THE ADVICE/INFO .. ONE FOR YA ! :beer:


the 465 is a newer trans
420 are old, like me ;)

it is alot of work , but i think worth it.
i'm still in the process...sort of
if you can have your rig down and dont need it as a DD
then go for it.
you will need driveline modification..
 
2badfjs said:
thats what i did
read this one hundred times http://www.root45.com/SM465Orion/
it's the trany to t-case adapter thats the big $$

i was fortunate and got my sm and adapter free :D

the three spd b/h will let the sm bolt right up.


GREAT INFO, I LIKE IT.. THANKS ! :D
 
FJ40 MNTCRZR said:
GREAT INFO, I LIKE IT.. THANKS ! :D

the best advice i can give you would be to have everything you need ahead of time before you even think about starting a project.
whether it take 3months or a year to gather everything.
abd rear,read,read...


have fun :D
 
FJ40 MNTCRZR said:
Thanks, is $50 a good deal for the sm465 ? :D

heck ya!
as long as you dont have to rebuild it...

i think the ten spline came out of 4x4 rigs, it's the least desired and cost bucks for an adapter.
the 2wd trans has more and cheaper adapters available....
 
I don't think I would trade a Toyota 4 speed for a 420 or 465. Not unless your going Chevy v-8 . Now the 3 speed Is worth loseing for a Chevy tranny.
 
Back
Top Bottom