SM465 Release fork - Cast type

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 11, 2005
Threads
159
Messages
1,910
Location
Sunny South
I can't get to any junk yards around here to get a cast iron release fork, someone mentioned before on a search that i pulled up that he used a 76 blazer clutch release fork. I can get one of those in a jiffy but so many people have mentioned these cast iron early style forks that i feel like i need to get one. Woody's write up just mentions an early cast iron fork that he got for 5 at a junk yard.

I have found a few on ebay and was just wondering if they would work. heres one from a 55-57 chevy....thanks for your time fellas
71_1.webp
 
I bought mine at the parts store

I bought mine at the part store. They had them brand new in stock for like $35.00. You will have to go to a REAL parts store. Not advance or auto zone.

If you can't find one locally, I can ship one to you. You can call the parts store directly and give them your Credit Card info.

We have the BEST parts store/parts guy in the world close to the house.
Marsh Auto Parts, Blountsville Alabama.

Let me know if you do not have any luck.

JR
 
Stamped/Cast

I'm with Woody on this one. The cast one did not work on mine either. I've got one of those stamped ones laying around somewhere.

JR
 
JRFJ4 -

brand new in stock? what did it come off of? a early chevy or the chevy blazer stamped type?


-i have the worst auto parts store around, the most unhelpful group of bastards i ever encountered. glad for your lucky streak...





i thought woody suggested using the cast type one and not the stamped one...
 
My bad.

I had a Brain Lapse.

STAMPED=NO WORKY
CAST=WORKY and is on my Cruiser as we speak.


I don't know what year it came from. I just happened to mention that I was going to have to go to the junkyard for the cast arm when he said they keep them in stock. That's what's good about my parts store, you tell them what you need and they got it.
Lawn Mower/Tractor/Import/Domestic it does not matter.

In fact Craig actually took me out to my shop and robbed parts off his own drag car so I could finish up my brake lines.

If you can't find one, I can ship you what you need.

JR
 
does the fork you have look like the one in the first picture?




if all else fails i'll buy the one off you but it seems they can be gotten for cheap.. thanks for your help though and i'll probably end up getting one off you...
 
Last edited:
bandy, I found the one in the first pic. ( I am in need as well) Part # is ZA-104 by a company called ATP. That is the only cast fork I can find.
 
Pioneer makes a cast one one. Still in production. Identical to the OEM part except for the lack of a cast in GM part number. Best fork for a conversion or a chevy drivetrain in A Cruiser. Part #CF104 Retail price about $65.00 Even CSK can get them (if they can figure out what book to look in).


Mark...
 
First Pic

That first pic looks almost like mine. Mine has slots where the slave cylinder rests instead of that hole. Other than that, I think its the same.

I think they used these cast until sometime in the early 70's.


J.R.
 
Back
Top Bottom