SpaceGhost
GOLD Star
- Location
- United States
This is the entire drivetrain from my Rock Crawler. May split up if no serious offers for complete package are recieved. $1300 + shipping (which I will help on). Inquire at msmythe@iei.net partial trades considered for 700r4.
Includes:
3spd bell housing, clutch/pressure plate, sm420, Splitcase Toybox (mini reduction unit w/2.8 gears, adapted to sm420 and split tcase, and the tcase), shifters, and tcase dual stick linkage/levers, and mini tcase mount.
This will NOT fit a stock wheelbase FJ40, min 100" wb to get it in. This is everything needed to install this from the motor to the output flanges. The floor will have to be cut for shifters, and possibly for tcase clearance, unless body is lifted. Rear out put flange is dual pattern, Mini and 4 speed yokes will bolt up, have to check the front, but had a 4 speed shaft on it.
Crawl ratio: 7.05 x 2.8 x 1.9 x 4.11? = 154:1
Includes:
3spd bell housing, clutch/pressure plate, sm420, Splitcase Toybox (mini reduction unit w/2.8 gears, adapted to sm420 and split tcase, and the tcase), shifters, and tcase dual stick linkage/levers, and mini tcase mount.
This will NOT fit a stock wheelbase FJ40, min 100" wb to get it in. This is everything needed to install this from the motor to the output flanges. The floor will have to be cut for shifters, and possibly for tcase clearance, unless body is lifted. Rear out put flange is dual pattern, Mini and 4 speed yokes will bolt up, have to check the front, but had a 4 speed shaft on it.
Crawl ratio: 7.05 x 2.8 x 1.9 x 4.11? = 154:1