Slider Material

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Most would say DOM if you can afford it, but there have been some that have used HREW successfully. I believe Boxrocket used some trailgear? hrew sliders from a taco on his 80 and they have been holding up as far as I know.
 
Should I use DOM or HREW for my slider material?
Thanks


Hey kid, if you want to fab a slider, I would sell you my unfinished sliders for the price of the metal. The sliders are DOM material and all you have to do is weld the outriggers.
 
Thanks, But I just ordered a set of DOM from Adam at 4x Innovations and he gave me a good deal on them. The DOM was not much more and I think worth every bit.
 
Should I use DOM or HREW for my slider material?
Thanks
Good question, some discussion would be interesting.

Thanks, But I just ordered a set of DOM from Adam at 4x Innovations and he gave me a good deal on them. The DOM was not much more and I think worth every bit.
WTF, you already placed the order, bragging about the good deal you got? And how DOM was worth the extra $? I don't understand. One might think that you'd want to listen to opinions first. I thought that that was one of the purposes of this forum - silly me!
 
Well, I also talked to some people as well, the forum tends to be alittle slow sometimes and I wanted to pull the trigger today and be done with it before the:princess: changed her mind and pulled the funds, it has been done before.
 
Well, I also talked to some people as well, the forum tends to be alittle slow sometimes and I wanted to pull the trigger today and be done with it before the:princess: changed her mind and pulled the funds, it has been done before.


Yeah, I been there - use it or lose it! Your question made me do a little research 'cause I didn't have any knowledge to help you out, I just wanted to hear the yays and the nays, but there was plenty other forums that discussed DOM vs HREW. What I got out of my research was for our uses, meaning hobby off roaders, the difference is not a big deal. What's more important is the structural design of the product and the quality of the welds. DOM is usually more expensive and stronger, but that also depends on your source. Prices can vary from a big difference to less than a buck/foot. Roll cages are where you don't want to scrimp, but you also don't want to bankrupt yourself on overkill. The ones with money to burn will argue and flame me for that, though. :cheers:
 
Back
Top Bottom