Slee 1" Coil spacers

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 3, 2007
Threads
21
Messages
50
Location
Awendaw,SC
Hey, I just got the Slee Coil spacers and just wanted to make sure that I don't go and mess my truck up by doing the install wrong. Who do you put them in? I know they go on top of the spring but how do you get them on top of the spring? Pictures would be nice.
 
the blue spacers?
just disco the swaybar and jack up one side until you can pull the coil out and put the spacer on top. real simple.
slee has photo instructions in his tech section on OME lift install- that will guide your way
 
the blue spacers?
just disco the swaybar and jack up one side until you can pull the coil out and put the spacer on top. real simple.
slee has photo instructions in his tech section on OME lift install- that will guide your way

And shock. You'll need to disconnect the shock as well.
 
Really? Do I really need to disconect the Sway bar?

If you don't you run the chance that you might dent the drive shaft on the sway bar. Don't ask me how I know. :doh:

can I not go flex out in a big ditch?

Sure, if you remove the shocks. Most likely your shocks will be the limit to drop and will not allow the springs to unseat. You need to remove the spring to get the spacers in.
 
WE installed the metal tech spacers three days ago. To get the spring out undo the steering stabilizer. Makes it much much easier..

Help me understand why the steering stabilizer needs to be removed? Or are you refering to the sway bar?
I've added/removed plenty of lifts on mine and other 80's, just never touched the steering stabilzer... sway bar and one side of the shock and you're in business. I can now switch a set of springs in under an hour
 
any before and after pics??
 
Would coil spring compressor's help out in this situation?



Harbor Freight

snap-on

Sears


?

They could be used but most times are more trouble than help. In my case we stood on the lugs to gain the extra space to slip the spacers on, but I had 4" springs. I've since removed them because I downsized my tires.


Kalawang
 
Back
Top Bottom