Shock Mount torque specs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 4, 2005
Threads
34
Messages
343
Location
Alexandria, VA
I'm in the middle of changing out the shocks on my 97 and was wondering about the torque specs for the bottom shock mounts, front and rear. I can't get a torque wrench up to do the rear uppers and i know the top shock nut is about 52lbs. Thanks for any help! By the way this job is going way smoother than I thought it would thanks to all the tips on here and Slee's site. :beer:
 
Thanks dude huge help! I did search... not sure how I missed that thread though. Titled "rear shock bottom bolt torque specs", could not have been more obvious or relevant!! Doh!
 
Fail!

Well the rear shocks went in no problem with proper torque specs (thanks CPOSEADOG). Only took about 90 mins. The fronts were a different story though. The driver's side top shock nut was on pretty good and I couldn't get at it with my deep socket. I went right for the nut splitter and mangled the sh*t out of the nut but couldn't get to the bottom part of the nut. Fail. I figured I'd just take a break and move to the pass. side shock. Got the top nut off after some fighting, then failed again with the bottom nut. Strap wrench couldn't bite enough on the shock body and my vice clamp on the shock bolt sheared the tip of the bolt off! :mad: That nut wouldn't budge. Without a torch or air tools I had to consent defeat. $108.95 and 45 mins later Midas had them on for me. My pride is bruised but for a total of $230 vice the $1000 toyota wanted to charge, at least I'm still in the black! :beer:
 
Back
Top Bottom