seat back actuator fix?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 19, 2006
Threads
115
Messages
670
Location
under Pike's Peak
The driver's seab back went down on the '95 but won't return up. Is there only one motor for up and down (if true then, my assumption is that it then may be a switch). Can anyone confirm my assumption and then tell me how to access the back of the switch?

Thank you
 
Had this happen to me on my first 80. Tried extensively to fix it, even had Christo try to help me. Diagnosis: can't be fixed. Pulled and installed used seat from a salvage 80.
 
Not saying can't!! But based on your diagnosis from 1,100 miles away, I had the "same" issue as you. Again, for me, new seat was only option.
 
To "school" you: there is a way to fix the forward/back motion of the seat. There are plastic gears that allow the seat to move f/b on the track. When the seat stops functioning, you can replace the plastic gears to allow for free movement. When the recline feature is toast, according to Christo, there is no cheaper way to fix, other than a new seat. I forget the engineering aspects to the recline feature, but 'tis cheaper to replace seat than time/effort/possibility to fix broken one.
 
Any other experience out here? I've searched and found a procedure for access to back of switch. Is that a likely cause, or is there some kind of mechanism that is irreplaceable?

Seat motor drove the back all the way down but no workey to come back up. Thanks for any and all help.
 
Back
Top Bottom