Seafoam Analysis

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 9, 2004
Threads
116
Messages
886
Location
Hills of Tennessee
Typically if my Cruiser or Runner runs a little rough I can put a can of Seafoam in them (Gas tank), and everything is good again.:)

Have any of you Chemist done an analysis on Seafoam to see exactly what is in there?

SS

PM if you want to also.
 
and emits fumes to make the driver thinks the engine runs smoother... :D
 
*gasp* You mean running a liquid to move carbon from my intake onto my cylinders is a bad idea? :flipoff2:
 
Try Seafoaming a old chevy 350, 87 fj60, 94 fzj80 and a 96 Camry.
You will see diff results.
When I did the chevy 350, I thought the fire dep was going to show up.
Not as much with the fj60 and only mild blue smoke from the 80 and Camry.

The Camry v6 is the easiest to tell when it need to be cleaned, it looses it pep.
 
Try Seafoaming a old chevy 350, 87 fj60, 94 fzj80 and a 96 Camry.
You will see diff results.
When I did the chevy 350, I thought the fire dep was going to show up.
Not as much with the fj60 and only mild blue smoke from the 80 and Camry.

The Camry v6 is the easiest to tell when it need to be cleaned, it looses it pep.

So you use the Seafoam in the PVC value? Not in the gas?

SS
 
Back
Top Bottom