Scion radio help needed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 19, 2004
Threads
213
Messages
4,421
Location
Hotel M-F, home weekends!
Ok purchased a Scion Head unit off ebay.
Trying to install in a 96 FZJ80.
I disconnected the factory amp.:D

I attached 2 harness to the right two connectors on the unit: it would play cd but no controls showed on the face.
Noted in black arrows.

Seems like I need a connector on the left outer plug but where from???
Noted with a red arrow.

Need help any input would be great.
IMG_1399.webp
 
Last edited:
You have done everything correctly, unless you are plugging in the connector for the "other" style radio (if you have a security radio it uses a different plug than a non security radio), both sets are there- it is the larger of the 2 plugs in your pic on the right hand side of radio.

look at where the plug ends come out of your harness.
 
When I plug both the harness into the right side I have CD playing & sound from the rear speakers but no controls on the face of the unit.

I'll tear the dash out tomarrow & take picture of how things look apart......might help the diag.:idea:
 
When I plug both the harness into the right side I have CD playing & sound from the rear speakers but no controls on the face of the unit.

I'll tear the dash out tomarrow & take picture of how things look apart......might help the diag.:idea:


It's been awhile since I did mine, but one of the plugs that
you plug into the Scion unit is NOT used for the factory unit.
It was taped up with foam and I had to rummage around a bit
to find it. Do a search as I think some of the threads had pics
of it.

Good luck.
 
The 20 pin left connector is to hook both Scion optional (in console) female miniplug input connector and the steering wheel controls !!!!
If you got this 20 pigtails connector you can hook any portable player to the aux input when you select aux in the head unit. ( You will need to add a 2.2 K ohm resistor between pin 19 and pin 16, left input will be pin 17, right input will be pin 15 and audio ground will be pin 16)

The 12 pin connector is to hook up the optional XM black box tuner
 
Last edited:
Just wanted to update everyone:

Tore the dash apart to take pics to document everything.

First off I have all three radio connections (shown in the picture)

The two gray will plug into the back of the scion unit perfectly, but the one white plug is to large for the scion unit.....with the 2 gray connected to the unit & [THE AMP UNPLUGGED] the Scion unit will play a CD but have no controls on the face.
I have no volume or track or anything showing on the face of the unit.

I did try opening up the scion connection I have pointed out in the picture but with sadness it didn't work.....still no controls.

Guess aftermarket is coming tomarrow:doh:

Just wanted to finish this so maybe useful to someone else in the future.:flipoff2:
IMG_1400.webp
IMG_1402.webp
IMG_1403.webp
 
Just wanted to update everyone:

Tore the dash apart to take pics to document everything.

First off I have all three radio connections (shown in the picture)

The two gray will plug into the back of the scion unit perfectly, but the one white plug is to large for the scion unit.....with the 2 gray connected to the unit & [THE AMP UNPLUGGED] the Scion unit will play a CD but have no controls on the face.
I have no volume or track or anything showing on the face of the unit.

I did try opening up the scion connection I have pointed out in the picture but with sadness it didn't work.....still no controls.

Guess aftermarket is coming tomarrow:doh:

Just wanted to finish this so maybe useful to someone else in the future.:flipoff2:


I don´t understand something: Does the radio fm/am section work fine and stations number are displayed ? Do you have volume display when radio is selected ?

If not, My guess is that your Scion radio is already damaged. By the way as you noticed your white plug is not compatible with the Scion hardware. As explained before the left 20 pin connector on Scion radio is for this vehicle steering wheel radio control and for hooking a sound source like an Ipod or any other player through the head unit aux button.

The covered rectangular hole down the two left head unit connectors is were the premium Scion radio has a connector to hook and control directly an ipod with a special wire harness. ipod status is showed on Scion display.
 
Last edited:
I don´t understand something: Does the radio fm/am section work fine and stations number are displayed ? Do you have volume display when radio is selected ?

If not, My guess is that your Scion radio is already damaged.

You could be right, as I mentioned the two grays plugged right in & only could play a cd but no controls or volume.Nothing apppeared on the face on the unit. Thought the white connector might give me those.....but I guess not.

So am I to assume the unit I purchased was junk & I was installing it right?

So the correct way is to use both the gray connectors & forget the white one used on the orginal factory deck......correct:confused:
 
I used the 2 gray connectors and everything works as expected. The connectors placement at the back of my HU is slightly different.


Correct, thats what I also did but after doing this CD would play but no functions or anything would work on the unit.
 
Ok, so if we all assume the unit I purchased was junk then I was installing it the right way (only using the 2 gray connectors-NOT the white one).

I just need to get another unit & try again.....:confused:
 
Back
Top Bottom