Rubicon Questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 16, 2016
Threads
19
Messages
203
Location
Yorba Linda, CA
I'm spending a week in Tahoe at the end of this month and I'm staying about a block away from the start of the Rubicon (not sure how I missed that until now? :confused:). I have been searching around for info on bypasses and things, but I was wondering if I could do a little bit and turn around. I'm not trying to be a hero, but if I could dip my toes into the water, why not? If anyone has experience starting form the Tahoma side, I appreciate any insight you could share. Maybe I'm nuts to even try? :eek:

I'm a mostly stock 98 LX470 with some exceptions:
OME 2866 rear springs
LC bars and shocks
285/75/16 BFG KO2s

I have about a 1.5" lift on almost 33" tires. My brother in law will be with me as well. He has a stock LX with working AHC, so if I have no chance, he for sure doesn't.

Thanks in advance!
 
I personally think you'll be in for quite a challenge with your setup. The Rubicon is no joke.
 
I don't see sliders on your equipment list. Perhaps drive to the trail head, then go for a hike.
A better rephrasing of my question is can you drive in a few miles before it gets really hairy, or is it serious business right away.
 
From that end it is paved for a few miles then dirt road for some more miles. After that as you get closer to Cadillac Hill you risk getting stuck, major body damage and broken ring gears. Was on Rubicon for Rubithon an few weeks ago in friend's 80, and would not take my 2000 LC on that trail and it is quite bit more built. Very few built 100 series Cruisers undertake the Rubicon, none at this year's Rubithon.
You could go up several miles, but once you hit some rough stuff, turn around. Without sliders, bumpers, skidplates, winch and lockers need to stay out of the rough.
 
Last edited:
From that end it is paved for a few miles then dirt road for some more miles. After that as you get closer to Cadillac Hill you risk getting stuck, major body damage and broken ring gears. Was on Rubicon for Rubithon an few weeks ago in friend's 80, and would not take my 2000 LC on that trail and it is quite bit more built. Very few built 100 series Cruisers undertake the Rubicon, none at this year's Rubithon.
You could go up several miles, but once you hit some rough stuff, turn around. Without sliders, bumpers, skidplates, winch and lockers need stay out of the rough.
Thanks! That's exactly the info I needed. I plan on turning around at the first chance of damage. Since I'm staying right by trail, I figured I should at least check it out.
 
I'm a mostly stock 98 LX470 with some exceptions:
OME 2866 rear springs
LC bars and shocks
285/75/16 BFG KO2s

drjman do you have a photo of your car? I'm driving a '98 100 VX with the same setup as you but want to put in the OME 2866 spring because I need some lift after I have added a rear wheel carrier and sub tank.
 
I’ve since upgraded to OME t bars.
402F24F1-0729-4298-82CB-F7777F6A5D7B.webp
 
Back
Top Bottom