RTH - Started won't stop!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 31, 2007
Threads
4
Messages
15
I have a '97 LX450 and today when I started it a couple warning lights stayed on so I shut the engine back off. However, the starter kept running. I had to pull the battery cable to shut it off. Touch the cable to the post, and yep, the starter comes back on cranking the motor. Of course it doesn't start since the key is off. Is it the starter, or just the solenoid, or am I going to have to have it tested/
Thanks in advance!
 
Can I remove the solenoid without taking the whole starter out, and if not do you really have to remove the battery box and cruisecontrol assembly? All I have is a Haynes manual and that is what it says. Thanks for the help, this is cheaper than a whole starter.
Thanks
 
Can I remove the solenoid without taking the whole starter out, and if not do you really have to remove the battery box and cruisecontrol assembly? All I have is a Haynes manual and that is what it says. Thanks for the help, this is cheaper than a whole starter.
Thanks



No - the solenoid is attached to the starter housing. Getting the starter out isn't especially difficult, but it's the most difficult part of the job.

Other than disconnecting the battery, you don't need to do anything else on the top side of the engine bay. I just updated my previous post with more informative links.
 
Thanks

Thanks again. A few dollars at the parts store is a lot better than $300 for a starter.
 
Back
Top Bottom