RTH: A/C compressor manifold torque

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

MoGas

Central Scrutinizer
GOLD Star
Joined
Jan 26, 2004
Threads
202
Messages
2,141
Location
Gold Canyon, AZ
I am replacing my compressor, and I am having difficulty finding the torque value for the 4 Allen cap screws that hold the manifold to the top of the compressor.

Thanks!!

IMG_2523.webp
 
Oh yeah, 1993 R-12 type.
 
My 1993 book shows only the line bolts.

IMG_2524.webp
 
Looks like Mr. T didn't want to repair that part. There is no information in either the '92 or '96 FSMs I have. Here's what is listed:

('92 FSM)
upload_2018-2-17_10-48-33.webp


('96 FSM)

upload_2018-2-17_10-49-13.webp
 
IMG_2525.webp
My 1996 book looks like the torque is 7ft/lb. I guess I can just start there.
 
So, since both refrigeration lines thread into the same material and have the same pressures, I would think it reasonable to use the same torque values: between 7-12 lb·ft of torque. I'd shoot for 10.
 
Yup. That's what I'm doing.
 
Back
Top Bottom