Rought Idle help asap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 19, 2007
Threads
18
Messages
36
Location
STerling VA
Guys need some help. I just finished doing my Valve cover gasket, pvc, gormmet and cleaning my throttle body (which was dirty as hell). After putting everything back, and taking her for a test drive. i noticed my rpm is not sitting at 600 even instead the rpm keeps jumping between 600 and 650. I checked all my hooses. Is there something i may have missed or is there some screw i can turn to get her back to idle constantly at 600. All help is appreciated. easy.

Took me 4 hrs to do as i was taking it
 
Your air intake hose is cracked somewhere between the ribs of rubber that go towards your throttle body. Hope that helps. :cheers:
 
All help is appreciated.

It helps us if you will give us the year model and the engine. Not all of us are in the US and sometimes we are asked for advice by diseasel guys.

Did you disconnect the battery or pull the EFI fuse? If yes, then give it a few start/stop cycles for the ECM to relearn.

-B-
 
Back
Top Bottom