Rotors and pads

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 5, 2007
Threads
3
Messages
5
Location
Atlanta
Well hello, I'm the new guy!! Been readin' and fixin, now I need to do some askin'. BTW, thanks for the great info, I want to keep this thing running as long as possible.

My question has to do with 100 pads on my 80 series truck. Do you use the 100's on the front and rear? I'm getting ready to do new rotors , so now is the time for upgrading pads.

I'm also experiencing some pedal fade while stopped. If I pump it, it seems to stay. Will a complete brake job fix this?

The PO did service before I got it about 15k ago, so oil's all I've kept up with so far (besides the little things.....!)
 
100 series pads just on the front as I have been told


Yep - 100 Series pads up front with the rotor change. You have to toss the anti squeal shims with the 100 series pads to get them to fit on your 80.

You have to stay with 80 series pads in the rear.
 
Well hello, I'm the new guy!! Been readin' and fixin, now I need to do some askin'. BTW, thanks for the great info, I want to keep this thing running as long as possible.

My question has to do with 100 pads on my 80 series truck. Do you use the 100's on the front and rear? I'm getting ready to do new rotors , so now is the time for upgrading pads.

I'm also experiencing some pedal fade while stopped. If I pump it, it seems to stay. Will a complete brake job fix this?

The PO did service before I got it about 15k ago, so oil's all I've kept up with so far (besides the little things.....!)

I had the same problem with my FZJ80; turned out to be a bad
master cylinder. If the problem remains after new rotors, pads,
and most importantly, a complete thorough flushing of the entire system, then go for the master cylinder, IMHO.
 
Back
Top Bottom