rotor question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 25, 2005
Threads
10
Messages
78
Location
Oakland, OR.
I'm trying to round all the stuff up for my disc brake conv. on my 71 fj40.

so for i have the knuckles of a 81 donor mini truck that that i have.

i'v done the search and read alot, and learned that 81-85 mini truck knuckles need 81-83 fj-40 vented rotors with the 2 holes for the screws that hold them on.

i just found some on ebay that say they are for a 80-87 4.2 ltr landcruiser.

will these work? the reason i ask is because of the year range going 80 through 87, not 81-83

just wanted to ask some experts before i waste my money.

thanks for any help.

oh, and calipers of a IFS 4 runner are the 4 large pistons that i want to use?
 
If the e-bay rotors fit 80-87, then they should be the vented discs that'll work with your set-up. The parts list for FJ40's probably cuts off in '83 b/c that's basically when Toyota quit importing the 40s. 80-87 (FJ60) has a 4.2L.

Calipers from any FJ6x will work with the vented rotors. I don't know squat about IFS caliper interchangeability.
 
ortayga said:
oh, and calipers of a IFS 4 runner are the 4 large pistons that i want to use?


V6 IFS 4 runners used a vented rotor with the 4 large pistons...


88-92 V6 4runners used four identically sized pistons in the front calipers, (the four cylinder 4runners did not ) and with some slight trimming of the stone shield, they will work, and work very well. This is the caliper that I use when I do these conversions, and also as an upgrade on Land Cruisers that already have disc brakes on them, that are running larger tires.( 35's and larger )


:beer:


Good luck!


-Steve
 
thanks for the help. i'll post some pics and stuff when i finish getting all the parts rounded up to start this project.
 
Back
Top Bottom