Roll Cage Design Q

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Valley Hybrid cage

Here is a thread for the "BMF" cage by Valley Hybrid 4WD. Orangefj45 and fc187 on Pirate are the owners. I had a chance to see this cage when I went to the Rubithon this year and it is very nice. All of welds are pefect and very nice tube bends.

Disclaimer: not affliated with any vendor and I paid for all my sh!t.

http://www.pirate4x4.com/forum/showthread.php?t=481371&highlight=valley+girl
 
anyone put the cross tube above the top of the windshield?
i've got a 69/40 and was thinking about putting the top tube over the wiper motor.

like right over with a bit of clearance.
layed a 2" piece of tube up there yesterday and it seemed like it wouldnt be a problem.

the reason i'm asking this is for full protection of the windshield.
the tube would be about an inch over the top of the frame.

and i'd still be able to use the soft top with no problems.

:idea:

thanx
jim

edit:

my goal on this is to keep all tubing as close to the outside as possable.
for maximum room and protection.

i've also heard that the windshield frames are pretty strong to begin with.
but glass blowing out in a roll is'nt very apealing
 
run a line from the cage that you propose to the hood.
Probably gonna crak the windshield anyway..

Besides, windshields ate better left at camp ;)
 
Mace said:
run a line from the cage that you propose to the hood.
Probably gonna crak the windshield anyway..

Besides, windshields ate better left at camp ;)

good point jason.
i do have one of the hood hoops like the metal tech version.

prolly just lay the hood on the w/shield.

i'll bring the tube back from the top, like most.

thanx all

i'll keep posting, the ront of the cage may get mocked up this week.

:grinpimp:
 
mace, help me out

Q:Besides, windshields ate better left at camp

how do you get a 35 year old windshield frame un bolted from the body?
i would love to take it off at camp.
 
bustanutley said:
first time around? Inpact blow screw driver

I take mine off on harder trails so I have it for the drive home :rolleyes:
X2
I would add soak the bejubsus out of the screws with liquid wrench for a couple of days before you start.
 
projektdotnet said:
Make sure to use strong bits...I'll get pics but I managed to round one of the heads out then break a flathead bit off in it...so much for mounting a passenger side mirror...that part makes it kinda look funny lol.
Ahh grasshopper you need to follow the path of the easy-out.
 
rusty_tlc said:
Ahh grasshopper you need to follow the path of the easy-out.
That path is wrought with evil...

The path of drill and retap is much more fruitfull..

:D
 
Back
Top Bottom