Couldn't find any Toyota or other off-road calendars for free. Had an ARB one this year, but wasn't crazy about it. Not enough Yotas.
RLC Classifieds
- Thread starter YotaJosh
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jan 13, 2007
- Threads
- 512
- Messages
- 4,684
- Location
- Fraser Valley, British Columbia
- Website
- www.ajae.ca
Buy 3 and give cyberfalco the 4th one for free. I think it was a hint..... 
You probably right, I'm a little slow sometimesBuy 3 and give cyberfalco the 4th one for free. I think it was a hint.....
... My wallet is a little thin at the moment... They would make great Christmas/Hanukkah/Festivus/Kwanzaa gifts though 
- Joined
- Apr 9, 2014
- Threads
- 19
- Messages
- 675
Looking for U bolt flip kit for my FJ60 and checking to see if anyone has one laying around somewhere.
My walker evans are for sale. If you're interested or know anyone who might be let me know!
- Thread starter
- #166
I have a 60" Hi-Lift jack I'd like to trade for a 48" model. It's red (all cast version), and in good condition. I'd like the 48" one to be all cast as well.
I'll sell it outright for $70 if you want it but don't have one to trade.
I'll sell it outright for $70 if you want it but don't have one to trade.
PM sent
RuffStuff diff cover. Fits semi float LC axles. $75
SOLD
Probably a little out of the norm, but maybe someone is looking...
It's time to let go of one of my saws. This is the one that gets used the least, so hopefully someone else can make better use of it. I have a saw the same size as this one I'm going to keep, and one that's a bit larger. The 026/260 is a great size for the average homeowner that cuts up a few trees a year, or even someone who cuts several cords of wood a year.
In Hot Springs
$300 firm for an offroader
http://littlerock.craigslist.org/grd/4768229807.html
Probably a little out of the norm, but maybe someone is looking...
It's time to let go of one of my saws. This is the one that gets used the least, so hopefully someone else can make better use of it. I have a saw the same size as this one I'm going to keep, and one that's a bit larger. The 026/260 is a great size for the average homeowner that cuts up a few trees a year, or even someone who cuts several cords of wood a year.
In Hot Springs
$300 firm for an offroader
http://littlerock.craigslist.org/grd/4768229807.html
Last edited:
- Joined
- Jan 13, 2007
- Threads
- 512
- Messages
- 4,684
- Location
- Fraser Valley, British Columbia
- Website
- www.ajae.ca
RE: 2015 CC Calendar
Stacey, received your check today, thanks!
Calendar going in the mail today!
Stacey, received your check today, thanks!
Calendar going in the mail today!
10-4. Thax 4 confirm. Looking fwdRE: 2015 CC Calendar
Stacey, received your check today, thanks!
Calendar going in the mail today!
- Thread starter
- #172
Bumping some of my previous posts...
Still looking for these.
The 3.73 FJ60 diffs are sold.
I'm still interested in a trade, but I'll probably buy a 48" off CL soon.
And I'm still looking for an 87+ splitcase transfer case with the 38mm idler shaft. I really don't need the whole case, just the 32T 19 spline input gear and the front output flange, but I know that getting a whole case is probably easier. I'm also hunting for a front driveshaft from an 87+ FJ60/62.
I'm looking for the rear seat belts from an FJ62. They are 3 point shoulder belts, whereas the FJ60 just has lap belts.
I need the retractors and belts, and the two plastic trim pieces around where the retractors go.
And I need brown belts, not gray.
Still looking for these.
The 3.73 FJ60 diffs are sold.
I'm still interested in a trade, but I'll probably buy a 48" off CL soon.
And I'm still looking for an 87+ splitcase transfer case with the 38mm idler shaft. I really don't need the whole case, just the 32T 19 spline input gear and the front output flange, but I know that getting a whole case is probably easier. I'm also hunting for a front driveshaft from an 87+ FJ60/62.
I traded for a set of DC Fun Country in a 315/75R16 flavor. These have less than 10k miles on them and are in great shape.
Asking $900, or best offer.
http://littlerock.craigslist.org/pts/4805749678.html
Asking $900, or best offer.
http://littlerock.craigslist.org/pts/4805749678.html
Not really offroad-related, but I'm looking to sell a porch swing for my parents. They took it down in favor of chairs. It's a nice swing in good condition. Asking $40, but really need the space, so make an offer.
http://littlerock.craigslist.org/fuo/4805725156.html
http://littlerock.craigslist.org/fuo/4805725156.html
Took a truck toolbox in on trade, and I have no use for it. It's a nice over-the-rail toolbox in good condition with lock and key.
Asking $150, or best offer. Located in Hot Springs.
http://littlerock.craigslist.org/pts/4805706660.html
Asking $150, or best offer. Located in Hot Springs.
http://littlerock.craigslist.org/pts/4805706660.html
Gimme that swang! PM in route.
PM'd you back, but sale is pending to someone else : >/ Will let you know if the deal falls through!!!
- Thread starter
- #178
A neighbor a few houses down from me has had this FJ40 for a few years. I finally met him and got to talk to him about it a few weeks ago. He mentioned to me that he's interested in selling it for around $12k. I will PM his number to you if you are interested.
The logo on the driver door is a magnet. This cruiser sat at the LR Zoo for a few years as lawn art.
And I did point out to him that the bezel is upside down and that fixing it would be beneficial to him in selling it.
Specs:
1974 FJ40
1.5 F motor "F and a half"
Weber carb, exhaust header.
4 Speed
Shackle reversal lift. Unknown springs.
Saginaw P/S box, Toyota P/S pump and bracketry.
Front disc conversion (aftermarket kit, not a mini-truck/FJ60 conversion). Uses Wilwood calipers.
Front roll bars added to factory roll bar to protect front seats.
Some minor rust in the usual places. Has been repainted from white to green at least once, maybe twice.
Pics:
The logo on the driver door is a magnet. This cruiser sat at the LR Zoo for a few years as lawn art.
And I did point out to him that the bezel is upside down and that fixing it would be beneficial to him in selling it.
Specs:
1974 FJ40
1.5 F motor "F and a half"
Weber carb, exhaust header.
4 Speed
Shackle reversal lift. Unknown springs.
Saginaw P/S box, Toyota P/S pump and bracketry.
Front disc conversion (aftermarket kit, not a mini-truck/FJ60 conversion). Uses Wilwood calipers.
Front roll bars added to factory roll bar to protect front seats.
Some minor rust in the usual places. Has been repainted from white to green at least once, maybe twice.
Pics:
Is this the one on Wagon Wheel Drive? Never could catch the owner outside when I'd jog by or when out for a walk with the kids.
When we were still living on Brookford, we had this 40, your mini, mine and Ape's 80's, my neighbor' blue 60, Forrest's insanely-sweet 60, and a couple 100's all within a 1 1/2 mile radius. And sometimes a green SFA Taco.
When we were still living on Brookford, we had this 40, your mini, mine and Ape's 80's, my neighbor' blue 60, Forrest's insanely-sweet 60, and a couple 100's all within a 1 1/2 mile radius. And sometimes a green SFA Taco.
Last edited:
- Thread starter
- #180
Yep, thats the one.
This neighborhood is Toyota-rich from time to time.
This neighborhood is Toyota-rich from time to time.