reverse switch - what amp rating?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 5, 2003
Threads
77
Messages
1,063
Location
Shippensburg PA
Website
www.iluvrocks.com
as part of my complete re-wiring, I'm adding extra backup lights to my 74 FJ40.

since all the wire from the fuse back is 14ga now, I should be able to hook a utility light into the reverse light circuit w/o stressing the wiring. :whoops:

however...

does anyone know what king of amperage the factory reverse switches can take?

It looks pretty heafty, like it can take it no problem, but I don't want to damage it $$$$.
I can wire up a relay system if I have to, but it will be a lot of work if it's not necessary.

...oh yea, I've got a 3 sp now, but a 4 sp is sitting in the garage for a soon to come swap :D
 
It depends on the lights you want to use.

I don't know the specific rating of the switch, but I'd doubt if you'd need to worry about adding one of the so-called 'tractor' light to the circuit. If you intend to try something in a high wattage halogen I'd go with the relay addition.

It's always safer to use relays when there's a question of overloading OEM parts or wiring which is often 18 gauge to begin with and oxidized with insulation breakdowns over time.
 
Watts / Volts= Amps



GL

Ed
 
I haven't looked at the common wattages yet, but I was thinking about a decent wattage floodlight. I know I've got a $20 *ATV* light on my 80's backup circuit thats like 35w-45w or something. I wan't something brighter than that.


thanks for the formula! (been a while since physics.... :rolleyes:)

so for interests sake a 100w light would draw around 7 amps at 14.4v and 10 amps at 10v.... good to know!
 
Klunky Chris said:
as part of my complete re-wiring, I'm adding extra backup lights to my 74 FJ40.

since all the wire from the fuse back is 14ga now, I should be able to hook a utility light into the reverse light circuit w/o stressing the wiring. :whoops:

however...

does anyone know what king of amperage the factory reverse switches can take?

It looks pretty heafty, like it can take it no problem, but I don't want to damage it $$$$.
I can wire up a relay system if I have to, but it will be a lot of work if it's not necessary.

...oh yea, I've got a 3 sp now, but a 4 sp is sitting in the garage for a soon to come swap :D


Mine shorted and almost burned down my house. Damn PO.
 
Klunky Chris said:
I haven't looked at the common wattages yet, but I was thinking about a decent wattage floodlight. I know I've got a $20 *ATV* light on my 80's backup circuit thats like 35w-45w or something. I wan't something brighter than that.


thanks for the formula! (been a while since physics.... :rolleyes:)

so for interests sake a 100w light would draw around 7 amps at 14.4v and 10 amps at 10v.... good to know!


Yes, that's it. A few years ago, my in-laws decided they wanted to light a 35' blue spruce that was 18' at the base, and they wanted me to engineer it.....heh.
I called a lighting company and told them the dimensions of the tree and they said minimum 900 lights.....7.5W each. Do the math on that one
It would draw almost 60 amps. Their house wiring was 100A so I talked them out of it, they still think I'm a party-pooper.
With all the cool bulbs out there, you ought to find something that will really light things up without breaking the amp-bank.
GL

Ed
 
Remove all question and doubt, and install a good relay.....it is really not a lot of extra work.


Anything that is going to produce significant lighting would operate brighter on a dedicated circut from the power source through a relay.


:beer:
 
Back
Top Bottom