Reverse Light wildcard

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 22, 2015
Threads
4
Messages
13
Location
Wyoming/Georgia
Greetings,
Been tackling projects on the cruiser as soon as the bank account allows it. The ride is an '82 fj60, and currently my reverse lights are staying on when in anything other than 2H; when shifted into 4H or 4L the reverse lights stay on.

I have pulled the shifter boots to look inside and have found the reverse light switch, however cannot see the wiring down to where it may be affected by the 4wd shifter. My 4x4 light on the dash has not worked since I got the car, but I assumed the light was just blown. Could this be intertwined with he reverse light debacle?

Has anyone else dealt with this? Thanks
 
Welcome to the mudness Donnie!
Where in Wyo are ya?

First, I believe you are on the right track checking the wiring into the tfr below shifter... however, the wiring harness and multi connector that resides in the left rear quarter panel may be showing corrosion... Making a constant 'on' situation.
HTH
 
Thanks for the input Micruz,

I'm in Jackson, south of Yellowstone.

I'm checking for corrosion on the wiring, however it seems like that may not be the issue just because I feel like if it were wiring corrosion the lights would be on or off, whatever, no matter what position the shifter was in….?
 
My guess is that there is a bad ground connection somewhere. AKA floating ground.

I believe that your 4WD light not working may have something to do with it.

When the transfer shift lever is pulled down into 4WD, that motion moves some things in the transfer case that flip a switch in the transfer to ON.

What could be happening is that when you shift to 4WD, the 12V is traveling through the transfer switch, but has found a "better" ground through the reverse light circuit than the indicator lamp.

The FJ60 has common grounding junctions that are kinda dinky and can burn up and go haywire if too much current passes through them. Thats where I would start looking.

Pictures below;

Gremlins-i need help from any electrical gurus out there

Link2
Is my alternator about to eat dust?
 
Last edited:
Donnie, I'm ovah the hill, Victor...
 
Back
Top Bottom