Resto Questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 31, 2005
Threads
31
Messages
230
Location
Honolulu, HI
Aloha! I will undertake the process of restoring my 10/72 (mfg date) 40 over the next few years with my father. This is in theory "my cruiser" not his, so i have a big say in what happens. I want to make it 100% original, like, right off the lot original, but my father wants to add some things during the resto. After we changed all 8 brake cylinders, hes sick of drums and want to convert to discs so there minimum adjusting involved. heh. I feel that this will spoil the OEM feel. I need a few good reasons as to keep the drums.

He wants to put aluminum rims, I want the stocker skinnys. Need a few reasons for that. Sounds silly, but if I got some good reasons, he'll follow. :)

Since this was a farm vehicle, with suprisingly only 27,xxx miles or something like that, it has been worked pretty hard hauling stuff around. It has a PTO winch, which was my grandfather's primary reason for buying it. He used it to pull trees for firewood to cook his pigs. (He owned a hog farm) Since we live in Hawaii :grinpimp: theres quite a bit of salt in the air. As a result, the body pretty rusted. I want a steel tub, not an aluminum one as my father suggusts. "Steel makes a real Cruiser" - CCOT I agree with them on that one. Does anyone (and if so, who) make a steel tub for a 10/72? A resto quality one that pretty much a 1:1 copy would be good. Over these next few years, you can guarantee that I will be here for assistance and progress pics. :)
Cheers! :beer:
 
Well, let's see what you got there. Pics!!

Your father has got some valid points for upgrading your Cruiser with more practical mods. But then again, you make a good case on how to make a "1 to 1 copy," as difficult and expensive as that's going to be.

I would say that you both need to agree on what the long-term intended purpose will be once your restoration is completed. Daily driver? Work truck? Off-road rig? Vintage show piece? :confused:

That will determine what direction you're going to go with things like OEM drum or disk brakes, steel or aluminum tub, stock or fancy wheels, etc.

Sounds like the most difficult modification you have ahead of you right now, is getting you and your Dad on the same page. Better take care of that "mod" first. ;)
 
I really thought hard about the brake issue with the 10/72 I am restoring. What really leaned me towards it was the safety issue and the fact that people like TLC4x4 do it on pretty much all of theirs. I don't see a real downfall in valuation. I have though kept all of the parts to convert it back if I ever desire.


In regards to the rims, I would personally stay stock. One is that the cost of new OEM rims is very reasonable. I like the look of the 33 x 9.50's or the 33 x 10.50's. If you are not upgrading to power steering you will want to stay with a skinny tire for ease of turning.

I agree with Landcruisersteve you really need to decide what dirction you are going. I can attest to the fact that a full on restoration back to stock is a long tedious and expensive proposition. If you have not seen it you may want to look at this thread https://forum.ih8mud.com/showthread.php?t=52396&highlight=1973+restoration .

If you are going back OEM all the way I would make sure that any mods are easily converted back. (Just my personal view)

The 10/72 to 9/73 models are getting very difficult to find year specific parts for. For instance the reverse light, you may find the housing but will not find any lenses. This model year had alot of little things that were it's own bird.

I would reccomend that you purchase the microfich from Toyota and take it to the library and get photocopies of the pages. I would then use those when dismantling to seperate the parts and store them with the peices in that group. Do not throw anything away or get rid of it until you are done. The most important thing with a "true" restoration is orginization from start to finish. I can tell you that an immense part of time is spent going thru each and every part and knowing what bolt and what washer and nut combo will aid in the assembly at completion time.

In regards to the body I would look two directions right now, one is CCot and the other is the guy in Panama that is reproducing tubs and beds. You will have to do a search here on mud. It seems like there is a thread in the vendor section. I personally had a local sheetmetal shop make the couple of small pieces I needed.

Let's see some pics!!!!!!!!!!!!!!!!!!!!!!!!!!
 
I agree with your dad and Groundup on the disc brakes, IMOP is a good upgrade and while not stock it does not hurt the value(it prolly adds value) as long as you use Toyota disc brakes, I would leave the rear drum

can't give you any reasons for the stockers except they will look MUCH better than any aftermarket alum wheels
 
No reason not to go 4 wheel disc, the rears are very easy to do...why leave an antiquated drum setup on the rear? If you're restoring, go for safety and convenience all the way. I have 4 wheel discs on all my 40's now. You won't be affecting your emergency brake on a 72, so there's just no reason not to do it. Wheels are wheels...easy enough to resto the stockers and have aluminum as well. "Steel makes a real cruiser". True enough, but you do live in a corrosive atmosphere, and ccot only sells steel, therefore the remark above. Rust is cancer...it gets in places you never imagined. If there was a very high quality aluminum tub available, and I lived in Hawaii (yeah, right!), that's the way I'd go.
 
Ok, you've got me convinced on the brakes.
The purpose of the resto, once complete.. Hmm. prolly a "Sit in garage next to other neat car and admire" type and an occasional "go to friend's house" vehicle. Being in Honolulu, theres really you need 4x4 for except getting out of a boxed in parking spot. Perhaps having a bit of fun in my friends humajanous backyard that has a nice hill to play around with 4x4. *wink*

Now, all that helpful advice, where to start....
k, the micro film stuff, how do I go about purchasing that?
My reverse light looks A+, side a small spot of rust, so that should be ok, but what I'm really worried about is the rest of the lights. The red side marker, the two front fender signals, and the brakelight lenses are cracked. I'll need an antenna too. Oh, yeah, the radio tuner knob nolonger moves the needle, im guessing theres a little belt inside that cut?
Ah, one more thing, where are the OEM rims and Hubcaps avilible from? And the spare tire was mounted to the spare tire carrier, which was off the cruiser, and is now not in my possession. :( So I need a spare tire rack too.. *sigh*
and wait, ONE more last thing (really): Are those cruiser tubs from Panama compatible with my 73?
Noooooes, I forgot ONE MORE THING! lol,: What do you guys use to resize pics? I took some, but theyre tooooo big.
Maybe I should just work for Toyota Parts Dept for summer job. Money AND more cruiser parts knowledge. Sweet.
If theres ANYTHING that I missed, then uh, bring it to my attntion I suppose. Or if theres ANYTHING that could be relavent to: Me, Cruiser, Hawaii, Japanese people (I'm japanese! :) )that you have to say or ask, let me know!

Thanks,
--Trevor
 
Brakes--the drums will stop the truck better if adjusted properly. But Pops is right, they're a PITA. That's why I converted to front discs (all Toyota) on an otherwise stock FJ40.

Stock Rims--Keep 'em. As Landpimp says, they look better. But also, if you keep the skinnys, you'll have no need to convert to power steering ;)

Easy Resizing: You can just use "Paint" under your Programs, Accessories to re-size. Under "Image" (I think), use the "Stretch/Skew" tool. Use the same number in both the "Horizontal" and "Vertical" blanks, and the pic will be re-sized proportionately. Save the pic as ("File", "Save As") .jpg
 
Ooooh, thanks. I'll have pics up soon. Maybe I should invest in a silver star. *bling*
 
Even though you say you're convinced on the brakes, I'm still going to say definitely do it for easy of repair down the road and for pure stopping power without frequent adjustments.

As far as wheels, the stockers are definitely the look to have, but you could always go fifties with your dad and use FJ60 chrome steel wheels. Next to stockers these are the best looking wheels on a 40 by far. And of course they are Toyota and are similar to the late model FJ40 wheels which were painted steelies.
 
So, where to get stockers and microfilms? ^^ See above x2 post.
Also.... Im engline has a bunch of the emissions stuff cut off and plugged. If I want to reactivate this for my resto, where can I get all the parts and stuff? The pipes comming out of the block have been snipped and crimped. *sigh* I need a cruzah pal over here.
 
For the microfiche give your dealer a call or contact Cdan on this board.

When you refer to stockers are you meaning rims? If so they area Toyota item, just be sure and order the ones with the tabs as they do sell them without the tabs.

As for the emmsions stuff Specter Off Road is your best bet. Get ready as your wallet will be a little lighter afterwards. I do have some extra stuff like the VSV, charcoal cannister and fuel seperator that I would sell.
 
CDan eh? Does he own a dealership or something? But will do. BEWARNED CDAN OF MY VERY INQUISITIVE QUESTIONS!
 
Back
Top Bottom