Replaced my 80

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 7, 2013
Threads
5
Messages
24
Location
Riverton wyoming
So I bought a new 1997 80 series today. I have some concerns and questions.

1. I think the engine is bad. What engine swaps are available? I'm not the most mechanical person so I don't want somrhing that will burn me out and not get finished. So easier helps (: I've put a 350 in my fj40 with a ranger tourque splitter so I'm not totally a weenie but I know I'm not the best either. Deisel or gas doesn't matter really but I honestly can't spend a huge amount on engines and I do have a couple Chevy 350s laying around.

2. I'd like to get some bumpers that are a little more substantial. Is there any manufacturer that builds some that aren't way high price? The fab shop in my home town can do it for about 600 per bumper. Problem is that guy is my ex wife's new husband lol. So.....yeah. Might not be the best idea.

3. Sadly this cruiser is the non locker model is the axle equipped with the locker already? I'm sure it isn't but not 100%

Lastly I need some wheels. Anyone got some old ones they would sell me? I live in central Wyoming and will travel a little of pay shipping .
 
You should look at @reevesci aka Trail Tailor for armor options.
Non locker model = no lockers in the front/rear you can do the CDL mod.
Can't help with engine swaps, I'm barely a :banana: mechanic, but there is a lot of info on here.
Good luck!
 
What makes you think it's bad? Does start? Does run? etc, etc..... These are pretty hard to kill. Swaps are expensive VS repairing your 1fz-fe IMHO in most cases at least.

Armor, MetalTech, BIO (Bump It Offroad), Trail Tailor, many out there.

Locker, Do you have a dial on the dash to the left of your steering column. There are actuator on the axels, and if you still have the sticker in the door seam there is a code KN??? that will say for sure. What is your intended use for the vehicle.
 
I'm gonna make it my hunting vehicle. I haven't tried the engine really but when I did it didn't want to crank and it seems like it's locked up. I agree on the swaps being expensive compared to fixing the stock engine. And no it's not equipped with the locker switch what is the cdl mod? If I do keep the stock engine has anyone put a turbo on one of these to get more HP? I would definitely like more power but it's not a huge priority. I appreciate all you guys help for sure. When I get it back home il check the vin.
 
what is the cdl mod? If I do keep the stock engine has anyone put a turbo on one of these to get more HP? I would definitely like more power but it's not a huge priority. I appreciate all you guys help for sure. When I get it back home il check the vin.

The search function on here is a thousand times better than it used to be.

Every question you asked has been covered extensively. Search around, enjoy the bottomless pit of information here on Mud

Feel free to ask if you need help clarifying what you find. Lots of friendly voices on here.
 
I finally got around to working on my 80. It cranks a few seconds then starts clunking bad so I assume the engine is blown. Do any of y'all have a recommendation as to where to buy a rebuilt one? Also I've heard of putting a 1uz engine in it and wondered if any of you have done that? Il search this site as well but really needing some help because I'm not the greatest mechanic
 
Havent seen any 1uz's installed in 80s but there are several 2uz's swapped on here. Best DIY thread is probably this one. It is 6-7 years old so there is more trial and error and unknowns than now but still lots of good info. Read some of the others as well to get a better understanding of what's required.

Project - EffjJay Eighty - 2UZ powered

Add your location to your profile; it might help someone local chime in that could help or point you in one direction or another. Also look in the clubhouse section nearest to you for potential local help or parts.

Someone just posted they had a good runner with 204k miles for sale in Colorado. It's buried in another rebuild cost thread. There's another in NC with 255k for 750. George at valley hybrids may have a lead on one in ca if you are located on the left coast.

Few turbo threads here as well. From mild to wild. Unfortunately no kits available but enough info here to put together the pieces.
 
Last edited:
Back
Top Bottom