Remote unlock question Plus others

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 26, 2005
Threads
124
Messages
796
Location
Wet side of Washington
So I bought a used 93, its pretty rough. Anyway, there are a bunch of minor issues.

As I was working on tracing them down, one thing that began to bug me was the lack of a remote to unlock the rig.

I assume it came with a key fob remote unlock thingie. I called the dealship, they are 93.00.

The parts guy, said it was possible it didn't come with a remote unlock. How can I figure this out ?

Also, when I get it is here, can program it myself?

The dealer wants 55.00 to program it. (that is of course if the car has that option)

JY

Question #2 the "D" for drive dosen't light up ever, Is that easy to replace?

More Questions to come.
 
If it's a factory system, there will be a red LED to the left of the steering wheel, on the panel below the vent. There will also be a 1.5" thick, 5" square box below the drivers seat. C-dan can get you a remote cheaper than that, he even walked me through the programming procedure over the phone with him.

You'll end up saving nearly $80 over the price quoted to you by your local shop.
 
So I bought a used 93, its pretty rough. Anyway, there are a bunch of minor issues.

As I was working on tracing them down, one thing that began to bug me was the lack of a remote to unlock the rig.

I assume it came with a key fob remote unlock thingie. I called the dealship, they are 93.00.

The parts guy, said it was possible it didn't come with a remote unlock. How can I figure this out ?

Also, when I get it is here, can program it myself?

The dealer wants 55.00 to program it. (that is of course if the car has that option)

JY

Question #2 the "D" for drive dosen't light up ever, Is that easy to replace?

More Questions to come.


Look under the drivers side seat. see if a black box is there. that would be the rs3200/ rs3000 controller for the remote locks.

not sure what years they were options in.

Yes, you can program it your self. Buy remotes off ebay for $30 ish -

im sure others will chime in with more specifics.
 
If it's a factory system, there will be a red LED to the left of the steering wheel, on the panel below the vent. There will also be a 1.5" thick, 5" square box below the drivers seat. C-dan can get you a remote cheaper than that, he even walked me through the programming procedure over the phone with him.

You'll end up saving nearly $80 over the price quoted to you by your local shop.

It has the led, do I need to pull the seat to see this black box??

It has leather, power everything, the switch. I would think it had a remote unlock
 
Grab a flashlight and look under the driver's side seat - you'll see it there. Programming takes no time at all. I only got one remote with mine, so bought two aftermarkets off of fleabay for about $16 each with shipping and handling (and programming instructions). And the aftermarket remote has significantly more range than factory!
 
I got an alarm system installed that has all the bells and whistles including remote, $140.00 installed, with lifetime warranty. I'm pretty sure you can get something similar in the states.:cheers:
 
Grab a flashlight and look under the driver's side seat - you'll see it there. Programming takes no time at all. I only got one remote with mine, so bought two aftermarkets off of fleabay for about $16 each with shipping and handling (and programming instructions). And the aftermarket remote has significantly more range than factory!

I actually used a flashlight. I moved the seat back and forth, I don't see a black box. So I suspect there is not one.

However as I was digging around under the hood, I see a speaker marked UNGO, so I suspect there is an aftermarket system..

I have some other things I am looking into.


Such as why would one dealer quote 55.00 for a tranny fluid change, and the other 175.00

I asked, neither drops the pan to clean the screen.

Are there two ways to change the fluid??
 
Thanks- and I need a FSM, will be ordering one shortly. Will it cover wiring?

The FSM does not cover wiring in enough detail to help with most projects. You can buy the Electronic Wiring Diagrams (EWD) for your vehicle from TIS or from MDC. Neither the FSM nor the EWD will have anything related to the alarm because they were port installed options on all Land Cruisers. I am not sure about the LX450's because they were standard equipment on those and the alarm *might* be covered in the EWD for those vehicles.

-B-
 
:banana:
The FSM does not cover wiring in enough detail to help with most projects. You can buy the Electronic Wiring Diagrams (EWD) for your vehicle from TIS or from MDC. Neither the FSM nor the EWD will have anything related to the alarm because they were port installed options on all Land Cruisers. I am not sure about the LX450's because they were standard equipment on those and the alarm *might* be covered in the EWD for those vehicles.

-B-

So the clicker thingie, is an alarm not just a remote unlock?

Port installed options= the harness is there, plug the thingie in?
 
:banana:

So the clicker thingie, is an alarm not just a remote unlock?

Port installed options= the harness is there, plug the thingie in?


it is MUCH more involved than that. it is very complex install unfortunately. if it didnt come with it from the factory/ port - dont bother adding it. (get aftermarket)

imo.
 
it is MUCH more involved than that. it is very complex install unfortunately. if it didnt come with it from the factory/ port - dont bother adding it. (get aftermarket)

imo.

I suspect that since there is a little speaker marked UNGO, that there is an aftermarket alarm.

I will look into that tomorrow.


How about some feed back on the cost of the tranny flush? Is there any reason one place would be some much more?

Or is that just the general MO of dealer service?
 
One probably quoted you a 'drain and fill' price, the other a full flush price. Be a lot more specific when you tell them what you want.

You WANT a full flush. Make sure that's what they are quoting you.
 
Oh, and your dome light question- your door sensors are shot or out of adjustment. (same as mine- so I can't help you fix that).
 
Question #3/4 Dome light works off the switch, however not when switched to "door" it dosen't work off any of the doors. Where should I start looking??

Search is your friend ;). Check these out:

https://forum.ih8mud.com/80-series-tech/62795-door-switch-recondition.html

or

https://forum.ih8mud.com/80-series-tech/138492-interior-light-lack-thereof-problems.html


Question #5 the tranny is a little low. How much fluid, will it take to go from.

Full cold-------> full hot. Currently it reads full cold, when the tranny is hot. (driven for a few miles)

Add some fluid, let it warm up, then check it again. Rinse. Repeat as necessary. :D
 
Search is your friend ;). Check these out:

https://forum.ih8mud.com/80-series-tech/62795-door-switch-recondition.html

or

https://forum.ih8mud.com/80-series-tech/138492-interior-light-lack-thereof-problems.html




Add some fluid, let it warm up, then check it again. Rinse. Repeat as necessary. :D

Thanks, some of that was helpful.


I uninstalled the UNGO alarm, it had an install date on it from 1993 with a little code thing. The reason I removed it completly, was someone had partially done so. Rather than try and figure out what they had done. I simply traced the wiring harness from the unit. And removed the whole thing.

I will look into a new setup.

On my dome light, if I unscrew the fixture, then with a test light switch the switch. It appears it should be working. At the time, I was a two beer mechanic. I reassembled the unit and it still did not work.

I will try again this evening.
 
Last edited:
So back to the dome light- after the alarm removal

Non of the dome lights worked ZERO.

Before with ungo box installed the light by the mirror and the first one in the pass area worked. After nada.

So after a month in the dark I pulled it all apart. (nothing to it really just removed the kick panel) I suspected that the wire crimps from the alarm install.

Sure enough that was the issue.
 
Back
Top Bottom