Refilling AC system

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 14, 2006
Threads
47
Messages
529
Location
Sonoma, CA
Website
www.myspace.com
I did a search and found some info, but I'm a complete moron and don't know what to do.

I bought a can of R-134a with the gauge and hose attachments.

I now don't know what the hell I'm supposed to do with it.

I figure since my AC isn't that cold and when you turn it off for 30 seconds the whole car heats up again that I need to add more.




Soooooooooo.


I read about how you're supposed to see bubbles in a hose near your battery or something when your AC is on. Except the only things I could find are metal and/or opaque.(Not see through:rolleyes:)

And I have no idea where the high or the low pressure service ports are.


Or the PSI to add the refrigerant to.



If someone wants to give me a step-by-step thing with pictures on how to add refrigerant to the AC system, it would be good for the FAQs to inform people like me.

I'll answer any questions you have.
 
be careful DO NOT OVERFILL you really should get a gauge that measures high side and low side...
 
Any Auto parts store carry the A/C refill can with gauge. The gauge should

have the psi and colored track so you dont overfill. Make sure you shake the

can well, than turn the t-valve counter-clockwise and install onto the r-134 can.

Turn your Rig on and put the A/C on Max. Install hose onto the low pressure of

A/C line. Plug the refill kit and turn t-valve clockwise. Make sure to spin the

valve slowly so you can indicate the pressure. The pressure should spike high

than starts to fall low. When you see the recommended pressure indication, you

should be good to go. Good luck i hope your compressor isn't out
 
Back
Top Bottom