Rebuild Question Ref Rings

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 19, 2006
Threads
62
Messages
212
Location
Hot Springs
Ok I am at a lost, maybe someone has addressed this and can help, I have ordered a new set of rings for a 74 FJ 40 with a F motor, the rings are in bags marked 1 2 4 and D4 . So 1 and 2 are simple were does D4 and 4 go and why was 3 skiped, I purchased these from SOR. any help would be great.
 
Ok I am at a lost, maybe someone has addressed this and can help, I have ordered a new set of rings for a 74 FJ 40 with a F motor, the rings are in bags marked 1 2 4 and D4 . So 1 and 2 are simple were does D4 and 4 go and why was 3 skiped, I purchased these from SOR. any help would be great.

If you call SOR and talk with the tech guys they should be able to shed some light on this. They are really helpful usually.
 
I did call sor and my repair guy called we both got different answers, I was told D4 goes in position 3 and my buddy was told it goes on the bottom, so we flipped a quarter and there on the bottom, I will let everyone know if it drinks oil , :beer:
 
The bottom ring on the piston is the oil control ring, its usually three pieces. A thin ring for the top and bottom of the land and the center ring is the ridged ring. Make sure you put them in exactly as the instructions in the box, because there are several different style oil control rings.
 
Back
Top Bottom