Rear window go boom......

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 17, 2002
Threads
832
Messages
6,596
Location
Bonham Tx.
Well not boom, but we hit a bump, something inside the door fell then the window slid down.........since it's like 35 degrees here and we were 30 miles from home and had the grand kid, I stopped and pulled it back up, folded some cardboard and wedged it in the weatherstrip.......What am I to expect tommorrow when I pop the door panel off?:confused: :confused:
 
Its been a while, mine is a 94.
disconnect speaker, pull door panel, mine was off track.
What I saw was the bottom of the glass has a gasket that holds
the glass in the bracket, but if you look closely the smudge marks on the glass seems to have moved.
I pulled the glass out. you have to pull the weather stripping around the frame and you will see the screws.
When you have the glass out use a rubber mallet and tap the bracket back where the smudge marks were and add some silicone so it won't move again, put back in reverse order and while your there lube tracts with some spray silicone.

Hope this makes sense..

Good luck,

Roland
 
I don't understand, did the glass break or not?

I had my left rear replaced a few years back after some goober broke it out to steel whatever he could find inside. The glass company (Safelite) was surprised when they could not find, or make a glass. Toyota supplied it. Remember the glass is factory tinted.

Maybe the regulator broke, but I bet since it was so cold, a loose plastic slide grommet broke. Just a guess.
 
I keep my windows locked before the truck is thawed out completely, my family knows not to roll the frozen windows down, but friends of kids (only happened once) have disslodged the glass from the track, same as happened to you.......the only real fix for this problem is to replace your glass runs:cheers:
 
The same thing happened to me. It's an easy fix, even a caveman can do it. Take out the four screws, three big and one small, on the door panel. Disconnect the switch. Pop off the speaker cover. Pry the door panel off. There are four or five yellow plastic retainers on the door panel. Be careful that you don't break off the pressed cardboard. After you take off the door panel you will see what fell off. It is a rectangular piece of metal that fell off the roller track. When you see it you will know what to do with it.
 
You guys were correct, the metal piece that the regulator roller fits on, fell off, it had been glued once before with some brown hard substance.......I cleaned it all out and re attached it using clear silicone......
I did this once before on an FJ55 so Toyota used the same method for a long time.......:flipoff2: :flipoff2:
 
Back
Top Bottom