Rear slide windows.... cages?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 5, 2009
Threads
13
Messages
40
Ok, so I have dogs and I wiiiiiiiiiiiish I could keep the rear sliding windows open for them. BUT, I can't. I used to leave them just cracked, but these monsters figured out how to push the windows open. Funny because I have to fight to get them to open, go figure.

While driving cross country last year and taking shifts, I would pass out in the cargo area with the pups and noticed the cargo area would get much warmer then the front. This has been something I have been working on, but have gotten no where with. Went to multiple shops and no one wants to do it or they do and they will call me and never follow up.

So here is my question, what would be the best option to put inside the window to keep the dogs from jumping out. I don't think I need full on cages like covers, but maybe a bar or two so the can't get their bodies out. 60lb dogs so not little, but perfect to get out. I am just not sure the best way to do it as my tools and skills are rather limited.
 
Last edited:
Search for some pics of Mot's truck. I believe he has a factory bar running across the rear windows. Looks like a pretty simple solution.
 
slowgrowler,

My truck (Most JDM diesel 80's) came with the factory 3rd-row window bars.

The comp I am on now does not have any pics of the area, but as R5 has said, I've posted some pics on the recent 3rd-row window screen thread(s) if you want to look for them.

You might want to see if there already are the holes/threads in your sheet metal which would make it pretty simple, and temporary.

I guess it kind of depends on how big your dog is, too though!

GOOD LUCK!!

Mot
 
Ahhh, figures. Are you able to order those? Regardless if I have the holes or not, I dunno if one would be enough so maybe I would just double up and run two on each window. Just not sure how much space there is with one from the picture. I wouldn't mind making new holes for them. So yea, any options on ordering 4?
 
I'm sure I could order them if they're still available from Toyota (I'll check in the morning), but if you don't care to have something temporary, it would be easier and far cheaper to weld metal bars back there... (You can paint them to match the interior as well)

Even if you went with the factory set-up you still might have to paint as I have not seen any 80's with tan/oak interior with the bars.

I'll let you know what I find out.

Mot
 
Let me know. Prob would just powdercoat them. These are a great solution to me. Don't have a welder and don't want them welding. This would allow me to install them how I want them and remove them if needed. It's a win win for me.
 
OK, I just did a couple of searches and it does appear that two colors were available, at least for the '94 (June) model.

It's doubtful (most 80's sold in Japan, AFAIK) have grey interior, that the tan/oak color is still available. But I WILL find out and let you know!

Mot
 
Just FYI the US market FJZ80s already have the mounting holes for the JDM bars. I checked mine because that's on my "to do" list.
 
hmm - Pics?
 
I'm after grey.
I imagine it wouldn't be the end of the world to paint it in the color to match your interior, but you're in luck because grey is all that Toyota has left.

Apparently they had three different color variations; grey, oak, and ivory (limited edition).

And true to my word, it indeed WOULD be cheaper to fab something up because the cost will be $37.5US each, plus shipping ($75US/pair, plus shipping).

I took one out and measured/weighed to see my shipping options, but the cheapest way would be to express mail it (1 week, online tracking, insured) for about $24US.

I could get the bolts/washers, too, but I wanted to give you the cheapest possible cost for the bar(s) as possible. :D I'd be happy to order them for anyone interested though. ;)

Let me know if any of you just gotta have them!

Did I tell you that I'm making the window/bug screens for the 3rd-row windows? :grinpimp:

Mot
3rd-row sliding window pics 017.webp
3rd-row sliding window pics 020.webp
3rd-row sliding window pics 022.webp
 
Mot, you period kick ass! I have no need at this moment for any, and was just trying to help the OG poster, but wanted to say what a blessing it is your on 'mud. :cheers:
 
What, you mean that you feel blessed to have me take your hard-earned $$$? :grinpimp:

It's MY pleasure! :hillbilly:

Just for fun, I've snapped some pics of the mounting hardware, I'll download them and post them in a jiffy!

Thanks for your kind word, R5! :crybaby:

Mot
 
I'm not sure about deserving though! ;)

Here are some pics of the mounting hardware.

I came up with three PN's, but I "think" you just need two (probably one PN has two of the three pieces you see in the pics, I'm guessing).

But one of the PN's costs like $2.50-ish (actual), each! So you'll need 2/side and 4 altogether, meaning it would be like $10 for both sides! :eek:

But I would have to order all three PN's to see if we need all three PN's though.

That said, it looks like you can probably come up with something similar, at least to keep it in its place though.


.


.


.
cargo bar mounting hardware 1.webp
cargo bar mounting hardware 2.webp
cargo bar mounting hardware 3.webp
 
Metal.. Metal mesh?? Like a dog kennel? I think in that case it would be the cheapest to still use the bars, get a small dog metal crate, chop it, and get it welded to the bars....... ok maybe a crazy idea but......
 
I just want to point out that it "looks" like the latches on the sliding windows in mot's truck are lower that the US spec FZJ. On my US 80, sans OEM window crossbars, the latch is centered from top to bottom. On mot's truck, it looks like the bar is centered and the latches are lower. Just an observation!
 
Back
Top Bottom