Rear Main question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 18, 2004
Threads
259
Messages
1,501
Location
Pacific Northwest
Have the engine out on a stand replacing all the seals from the head gasket up. Not sure on the terminology but the piece that the rear main seal fits over has a groove in it.....looks like from the seal it self. Is this going to leak big time when I put the new seal on?
 
Yes, it has leak potential due to the groove. You can try to set the seal at different depth in the carrier (unless it came installed) so the lip dosn't ride in the groove, or you can try to locate a Speedy Sleeve.

v5199_.jpg
 
Yes, it has leak potential due to the groove. You can try to set the seal at different depth in the carrier (unless it came installed) so the lip dosn't ride in the groove, or you can try to locate a Speedy Sleeve.

v5199_.jpg

Any ideas where I can order one online and the size?
 
You can go to any auto parts store and get one made for your vehicle.
 
Speedy Sleeve’s can work, but I almost never use them, have seen them split, destroying the seal.

Define “groove”, it’s normal for there to be a polished line where the seal rides and it may actually improve the life, sealing of the new seal. For there to be a significant groove, abrasive material had to become embedded in the seal, it can happen, but is rare in a main seal, they are well lubed by engine oil. If there is a significant groove I just slightly over/under drive the seal, so it rides on a fresh surface.
 
Speedy Sleeve’s can work, but I almost never use them, have seen them split, destroying the seal.

Define “groove”, it’s normal for there to be a polished line where the seal rides and it may actually improve the life, sealing of the new seal. For there to be a significant groove, abrasive material had to become embedded in the seal, it can happen, but is rare in a main seal, they are well lubed by engine oil. If there is a significant groove I just slightly over/under drive the seal, so it rides on a fresh surface.

I can run my fingernail in it. It is by no means a polished line.
 
Back
Top Bottom