turbo8
Supporting Vendor
Hey, I have been making these for the 200 series and was wondering if anyone would be interested in me making some for your 4runners?
These will have to be a little different to clear the parking cable mounting bracket but will look similar to the 200 series.
They increase the stiffness of the rear lower control arm and decrease the chance of the arms getting bent from impacts. They come with all mounting hardware, can be installed in under an hour and the only tools really required are an Allen wrench set.
Skids are 304 stainless steel and the clamps are 6061-T6 Aluminum.
These should fit the following:
Lexus
2003-2009 GX470
2010-2022 GX460
Toyota
2003-2022 4runner
2007-2014 FJ Cruiser
Trying to get under $300 for a set, but that will depend on the quantity. I will be posting this in the 4th/5th gen 4runner and FJ cruiser sub forums too.
Pic from the 200 series
Preliminary design
These will have to be a little different to clear the parking cable mounting bracket but will look similar to the 200 series.
They increase the stiffness of the rear lower control arm and decrease the chance of the arms getting bent from impacts. They come with all mounting hardware, can be installed in under an hour and the only tools really required are an Allen wrench set.
Skids are 304 stainless steel and the clamps are 6061-T6 Aluminum.
These should fit the following:
Lexus
2003-2009 GX470
2010-2022 GX460
Toyota
2003-2022 4runner
2007-2014 FJ Cruiser
Trying to get under $300 for a set, but that will depend on the quantity. I will be posting this in the 4th/5th gen 4runner and FJ cruiser sub forums too.
Pic from the 200 series
Preliminary design