rear kaymar bumper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 4, 2007
Threads
120
Messages
446
Location
CANADA
stupid ???? but are they actual working lights....ie turn signal brake light etc or are they just reflectors?

also...any pics of the tire mounted on the left hand side
 
Last edited:
I don't have the rear swing out, but yes the lights are functional. Park, Brake, and turn signal (3 seperate bulbs on each side)
 
Last edited:
Yes those lights should work as intended and here is the proof YouTube - Kaymar Brake and Turn Signal. Here are the pictures of tires mounted on left hand side.
97Land Cruiser with Kaymar Deluxe.webp
97Land Cruiser with Kaymar Deluxe1.webp
kaymardeluxebumperinVA2.webp
 
Last edited:
hahhah thats my video clip

Nobody around that day.. wanted to make sure everything was working properly. Don't have a clue why i uploaded it to the web though.

There's actually 2 bulbs in the housing, not 3. One brake light and turn signal only. No running lights.

How come you don't have running lights in your Kaymar? Mine has them. I actually have three bulbs inside the housing. You might want to recheck yours.
 
How come you don't have running lights in your Kaymar? Mine has them. I actually have three bulbs inside the housing. You might want to recheck yours.


I didn't think I was going crazy, unfortunately I'm about 2000+ miles from my 80 to check. But I was pretty sure there is a center 10watt bulb that is for running lights, then towards the center of the bumper are the brake lights, and on the outside behind the orange are the turn signals. There are also 4 wires going to each side. (Power for each function and a ground)
 
Posted by Bear80
The lights are just a typical Hella housing. TJM also uses them in their bumpers. Should be able to order them from any vendor with a Hella catalog. Malmon is correct, there is a smaller bulb for running lights in between the red brake and yellow turn bulbs.

The Bear is right! Here are some pictures of the bulbs.
kaymarfj80wiring08.webp
kaymatfj80wiring09.webp
 
Wholy crap. I must have been out of my mind the day i wired mine. These guys are right, don't listen to me. I'll pull them apart tonight and toss the 3rd bulb in. This will be good because at night my rig is kind of hard to see since we have dual spares and they somewhat block the stock tail lights.

So you say its 10 watts... does anyone have a part # for the local parts store? I already have euro spares for the brake and turn signal.
 
don't use the full power recommended (21W IIRC) for the big bulbs. They will eventually damage the plastic apparently. I got weaker ones (13W) and they are still way bright (brighter than OEM, amazingly).
 
I've never paid attention to this. Funny.

Dave, I can pop my cover and see if I can tell on the running light bulb if you need me to.
 
Back
Top Bottom