Rear Hatch Measurements

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 1, 2002
Threads
55
Messages
259
Location
Peachland, BC, Canada
Website
members.sounddomain.com
I'm trying to fit the rear hatch to a '78 Hardtop and need a couple things...

- Where do the lift struts bolt to on the hardtop? Could someone take a quick measurement for me? Pics of how the struts are mounted (to the hardtop and the actual hatch) would be great too, the hatch I have didn't come with any hardware.

- Can't find any strikers online, so I'll see if I can find anything at the junkyard or maybe try to make something out of angle iron. I just need some measurements (overall size that is flat against the side of the hardtop and how far up it sticks) Looking for #27 on the 3rd pic down.

http://www.sor.com/sor/cat134.tam?xax=26125&page.ctx=cat134.tam

Thanks in advance!!

Shawn
 
Last edited:
I dont have the camera handy, but heres some numbers:

The striker flat piece that will rest against the lock on the hatch is 1.25" from the inside of the top. It does adjust front to back to get the hatch more snug when its closed.
The stricker is 1.75" long, and the top of it is mounted 21.5" down from the top of the side.

-Dustin
 
Back
Top Bottom