Rear Difflock

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 6, 2008
Threads
1
Messages
1
hi there folks this is my first post on you awesome and well put together web site i have already read some usefull stuff which has helped me big time. Hoping someone here can help as my rear diff has not ever locked since i got the motor 2 years ago, having taken a couple of days off at christmas decided that i would have a look at it, In short ended up removing the locker assembly and stripped the motor it was full to the eyeballs with **** so cleaned it all up then found that the magnets had come loose so after glueing them back on put it all back together and with the locker electrics connected back to the vehicle EUREKA it works, While exposed I engaged the diff by hand and it locked the diff. All back together out of workshop into the back yard into low box and switch on rear diff guess what still no diff . Can some help PLEASE :bang:
 
land tank and i just saw this happen on my front locker. everything was engaging properly until it was all tightened down in the axle.

the solution? for us it was to pull it apart again, make sure there was no corrosion on the frictional surfaces. landtank used fine grit sandpaper to remove this, then lubricated all applicable parts with white lithium grease. put it back together and it worked.

what happened was when the locker was tightened up in the axle, the corrosion on the mated surfaces was keeping them from sliding freely.
 
when you take the spring gear assembly out you have to put it in in the right position. if you don't the locker will either not engage or after engaging it will not disengage. i fought with one when i didn't know how to put it back together correctly, after quite awhile i got it right. unfortunatly i don't remember exactly how it goes with out lookin at it.
 
Back
Top Bottom