Real time....speedo wires?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 28, 2006
Threads
31
Messages
164
Location
in my house
Saturday my speedo started jumping around. I Came home and searched threads on speedo troubles,and narrowed it down to sensor on the back of the t-case. Got under there tonite and when i pulled back the wire wrap the red wire is still in one peice. The brown and white wires look like they were cut about an inch from the sensor. I am tryng to pull the plug oou of the sensor to repare wires and I get the friggin thing out. The whole sensor is tisting a little. I dont want to break it. Is there a trick to getting tha plug out of sensor??? Is the sensor supposed to wiggle a little????
 
1) The wires (at least 12in or so) are a part of the sensor. The connector is on top of the TC, IIRC.

2) The sensor is "inline" with the speedo cable and gear, and can be pulled out *without* affecting the performance of the speedometer, at least on a 91-92. What makes you think the cable itself is not the problem? That's pretty common.

Curtis
 
Back
Top Bottom