Real time Help: RDB Bolts.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 4, 2005
Threads
163
Messages
5,340
Location
Seattle, USA
Hi All:

I'm starting the rear disc brake swap today on my FJ40, doing the atypical Monte Carlo caliper/GM 1/2 ton truck rotor version of the conversion.

The mounting brackets I'm using are also the typical ones used with this rear disc brake swap. But while thinking about the process this morning, I realized for all the parts I'd procured, I did not have the mounting bolts for the caliper brackets!

I've searched a few of the online write-ups on this swap but have not found out what size and length of bolting bolts to use.

So, anyone know off of the top of their head?? Or, have the info squireled-away someplace easily accessible?

Thanks in advance for the help (and the bandwidth!)

Regards,

Alan
Seattle
 
Take your stock bolts down to the hardware store and get some that are about 1/2" longer than your stock ones.


Call it good.
 
The mounting bolts that I ship out with the caliper brackets I sell are 3/8"x1.25" long, NF, with metal locking nuts.


:beer:


-Steve
 
Hi All:

Thanks guys for the responses!

Good idea, "Mace!" Duh! ;-)

Thanks "Poser" for the bolt size!

Out to the hardware store I go!

Regards,

Alan
Seattle
 
That # is the complete mounting hardware kit for the calipers in question. The hardware that attaches the caliper to the bracket.


reardisc.jpg
 
bull said:
That # is the complete mounting hardware kit for the calipers in question. The hardware that attaches the caliper to the bracket.



Thank you for the clarification.......I did not see where the caliper to the bracket was the hardware in question..I think he was talking about mounting the caliper brackets to the axle housing.....


Thank you for the NAPA number....this will be added to the FAQ!


:beer:
 
Back
Top Bottom