real time help-'94 power steering

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 28, 2004
Threads
157
Messages
2,023
Location
Norwich, VT
looks lke the return tube from the gear housing had released all PS fluid.....Anyone have access to a diagram of the pipe/tubing in that vacinity? I'm not seeing a good diagram in the FSM and am interested in what part(s) I can replace to fix the leak....its not the cooler as I have previously replaced that with an aftermarket solution......off to trouble shoot/narrow down scope of problem....Any help/thoughts welcome.....Depending on what I discover I may install some sort of hose band aid to get me through the Winter......At least it happended in my driveway and my :princess: was smart enough to realize something was wrong - truck suddenly had an "armstrong" steering system :D

Cheers....I'll check back in a few perhaps with a photo...
 
Is it one of the soft return lines? I lost one last month, and was able to replace it with some transmission cooler line from Napa for a few bucks. The toyota dealer told me that the only way to get an OEM hose for the one that blew was to buy a ~300 $ set of hoses. I would think a '96 would be the same? Took around an hour to replace, it was helpful to take out the battery tray to get in there. I can take a pic highlighting which one I replaced if that'd be helpful.
 
Is it one of the soft return lines? I lost one last month, and was able to replace it with some transmission cooler line from Napa for a few bucks. The toyota dealer told me that the only way to get an OEM hose for the one that blew was to buy a ~300 $ set of hoses. I would think a '96 would be the same? Took around an hour to replace, it was helpful to take out the battery tray to get in there. I can take a pic highlighting which one I replaced if that'd be helpful.

Arg! Thanks for the rapid reply.....I went out and figgered which hose was leaking.....The good news is is that it was one of the ones I had previously replaced and was easy to re-replace....the bad news is that it is one of the ones I had previously replaced...:mad: I don't like doing things twice. :mad: the hose was swollen and was soft and had developed a pin hole (where all of the fluid was being pissed out) I had pretty good confidence in my first repair - unitil now:mad: :confused: :mad: . Now I will revisit this power steering system pretty darned thoroughly in whgen it warms up in a few monthes.:beer:
 
Call cdan. goschbrandon is correct about the return line not being a separate servicable item. Dan has found a similar return hose off a Previa that can be cut to fit for around $20 IIRC.

Hopefully it's just the return line. The pressure line to the PS pump is just about expensive as the pump itself. Don't ask how I know.
 
If your having trouble w/ the cost of the new hose assemblies then check w/ some hydraulic rebuilders in your area. It's the places that build hydrailic hose assemblys for tractors,dump trucks,garbage trucks, you get the idea. I've restored old tractors and muscle cars where the parts are obsolete and get the stuff rebuilt at the local hydraulic shop.
 
I had a leak in a low pressure hose that I replaced during a nice full moonish snow flurry evening.....Now I've got foaming so I think I need to bleed system
 
Back
Top Bottom