Real time diff help needed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 25, 2005
Threads
41
Messages
156
Location
Bradenton, FL
I have a 77 BJ40 and am trying to order a Powertrax no slip locker. According to Powertrax I should have a 12 bolt diff cover, but mine only has 10. Do I for some reason have the 10 spline axle? If I look at the slip yoke would it determine what I have? Just want to make sure and order the right locker. Thnx.
http://www.powertrax.com/toyotans.pdf
 
I know nothing about BJ and foreign market cruisers but I would be shocked and amazed if you have 10 spline axles in your 77 unless someone swapped in an early axle which would be a centered diff which would be a dead giveaway.

Is your axle full or semifloat and is the diff offset to the side or centered?
 
You should not have a 10 spline axle in that truck....


And "looking at the slip yoke" will not matter either....


You should be fine with 92-2088-3005


(Provided your chart is correct) ;)


:beer:
 
Back
Top Bottom