Hi everyone,
I have land cruiser 1993 1fz-fe, I have been working very hard to get my LC to a mechanically sound state and i have come across many issue and have solved them. This is the last issue that i hopefully will be solving.
My land cruiser has started flashing the OD off light along with the CEL light. This only happens at highway speed, when ever i accelerate to the upper end of the speed the OD odd light starts flasing and the CEL light comes on solid(not flashing), I took a code the other day and it came 42 VSS, now my speedo works fine as far as bouncing all over the counter is concerned, what it dose is that it always shows a speed of 10 kph below what I am actually doing. I will be replacing the VSS but i am not sure if it will shut up the OD off light.
I read the that the OD off light itself is a CEL light for the transmission so can anybody tell me how i can read the code from there. Other suspicions like kick down cable and solinoids and low fluid have already been tested and all are fine it runs fine and shifts fine.
Please help.
I have land cruiser 1993 1fz-fe, I have been working very hard to get my LC to a mechanically sound state and i have come across many issue and have solved them. This is the last issue that i hopefully will be solving.
My land cruiser has started flashing the OD off light along with the CEL light. This only happens at highway speed, when ever i accelerate to the upper end of the speed the OD odd light starts flasing and the CEL light comes on solid(not flashing), I took a code the other day and it came 42 VSS, now my speedo works fine as far as bouncing all over the counter is concerned, what it dose is that it always shows a speed of 10 kph below what I am actually doing. I will be replacing the VSS but i am not sure if it will shut up the OD off light.
I read the that the OD off light itself is a CEL light for the transmission so can anybody tell me how i can read the code from there. Other suspicions like kick down cable and solinoids and low fluid have already been tested and all are fine it runs fine and shifts fine.
Please help.