Re-gearing Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 1, 2006
Threads
104
Messages
573
Location
North Jersey
I'm planning to retrofit my non-locked 80 this spring. I would like to rebuild the 3rd member I have and re-gear it to compensate for my 285's Can I just re-gear the rear for now and do the front at a different time ( basically don't want to tear the front apart again just rebuilt it last summer) or is that a no-no to have different gears between the front and rear on a all wheel drive vehicle. The last thing is what would be the best gear ratio to install for the 285's with the option of maybe going to bigger tires in the future.

Thanx in advance
George
 
Gotta have the same gears front and rear. You'll toast your VC and who knows what else.

Regearing to compensate for 285's is not necessary. 4.56 gears would get you back to / beyond the stock ratios, but the benefit would probably not be worth the effort and cost.
You could certainly regear to a higher ring & pinion ratio to get more crawling powah by going to 4.88's, but I don't think I've heard of anyone regearing on 285's to compensate for day-to-day performance.

Hayes
 
Back
Top Bottom