Radiator Flush Valve

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It's on the drivers side lower corner of the radiator. Just feel around in that area and you will find it. I can't remember if you have to pull off the skid plate to get to it.

Edit: Don't forget to drain the engine block when you do the job. There is a 14mm bolt that threads into the driver's side of the block. You can see it if you look directly between the two skirts just behind the shock tower.

Check out the faq. IIRC e9999 made a really in depth write up that details the whole process.

Also make sure to use distilled H2O.
 
I just drained coolant the other day, and it would definitely help to pull off the skid plate.
 
pull the "skid plate" off.

it's a little touch to locate -- I was looking for something whte...but mine was black...but now the black's rubbing off, so it's sort of black and white :rolleyes:

you'll find it on the lower driver's side of the radiator.
 
Don't know if anyone else has tried this, but to save time draining radiator, instead of using petcock ("flush valve"), I'll just pull engine side of lower large radiator hose. Ya gotta be careful lining up catch pan or 5 gallon bucket, but it sure saves a lot of time waiting on that slow petcock. Still good idea to pull skid plate, though. Also remove radiator cap first to help coolant to completely drain.
 
Back
Top Bottom