Pier Acerni wins Back to Back on Raceline Wheels GARDEN GROVE, CA*** AUGUST 19, 2013: *Pier Acerni chose Raceline Wheels before their first King of the Valleys UK event last year.* Since, he has competed and won both King of the Valley events and competed at the 2013 King of the Hammers.* “Yes, we run […]Related posts:
Pier Acerni wins Back to Back on Raceline Wheels
GARDEN GROVE, CA*** AUGUST 19, 2013: *Pier Acerni chose Raceline Wheels before their first King of the Valleys UK event last year.* Since, he has competed and won both King of the Valley events and competed at the 2013 King of the Hammers.* “Yes, we run the 17×9.5 Monster Aluminum Beadlock wheels.* We didn’t punch any tires, different to others that cut many tires.* Our car is very heavy weight, but the wheels are very strong and we haven’t had any problems in the rocks,” said Pier Acerni of Italy’s Team Acerni Racing in his broken English.
“The new edition of the UK race is much tougher than the previous, the circuit was harder and longer with 1 prologue of 3.5 miles and 4 stages of 22 miles each for a total of a 90 mile race,” added Acerni.
Raceline Wheels RT-Monster competition beadlock wheel has proven to be the best purpose built beadlock wheel on the market.* Its 32 bolt system, strengthened inner lip and rugged design make it the perfect Wheel for races like King of the Valleys, King of the Hammers, W.E. Rock, Dirt Riot, CalRocs and Jeep Speed Series among many others.
The Bead Lock supports the strength of the wheel allowing drivers the security of knowing that a flat tire will not be the end of their race day.* They are strong enough to stand up to the toughest challenge that any racer can throw at them. The RT-Monster Wheel has been trail and race tested for over five years with a continued winning streak.
This wheel is not DOT approved for highway use, and it is suggested that tire pressure does not exceed 25 psi.* They are offered in 15×8, 17×8.5 and 17×9.5 with a range of bolt patterns, back spacing and center bore options.* More information on the wheel can be found at*http://bit.ly/19wkojH.
For more information on this wheel or upcoming events please go to*www.facebook.com/racelinewheels.
About Raceline Wheels®
Founded in 1996, Raceline Wheels® are competition proven wheels with multiple championships in many different racing disciplines.* Raceline Wheels® has had great success transferring this* knowledge from racing to the street, bringing the same high quality products to a full line of wheels for everyday vehicles.* Headquartered in Garden Grove, California (Orange County), Raceline Wheels® is a wheel industry leader in performance, craftsmanship, engineering and innovation. Owned by Allied wheel Components, Inc., Raceline Wheels® distributes its products through an independent distributor system in the United States and through international distributors in more than 30 countries.* For more information on Raceline Wheels®, log onto*www.racelinewheels.com.
Photo Credit: Slapstick Media
Related posts:
Link
- Acerni Repeats ULTRA4 Win at UK’s 2013 King of The Valleys
- Raceline Wheels Monster $5,000 Bounty at 2013 King of the Hammers
- Raceline Wheels Monster $5,000 Bounty at 2013 King of the Hammers
Pier Acerni wins Back to Back on Raceline Wheels
GARDEN GROVE, CA*** AUGUST 19, 2013: *Pier Acerni chose Raceline Wheels before their first King of the Valleys UK event last year.* Since, he has competed and won both King of the Valley events and competed at the 2013 King of the Hammers.* “Yes, we run the 17×9.5 Monster Aluminum Beadlock wheels.* We didn’t punch any tires, different to others that cut many tires.* Our car is very heavy weight, but the wheels are very strong and we haven’t had any problems in the rocks,” said Pier Acerni of Italy’s Team Acerni Racing in his broken English.“The new edition of the UK race is much tougher than the previous, the circuit was harder and longer with 1 prologue of 3.5 miles and 4 stages of 22 miles each for a total of a 90 mile race,” added Acerni.
Raceline Wheels RT-Monster competition beadlock wheel has proven to be the best purpose built beadlock wheel on the market.* Its 32 bolt system, strengthened inner lip and rugged design make it the perfect Wheel for races like King of the Valleys, King of the Hammers, W.E. Rock, Dirt Riot, CalRocs and Jeep Speed Series among many others.
The Bead Lock supports the strength of the wheel allowing drivers the security of knowing that a flat tire will not be the end of their race day.* They are strong enough to stand up to the toughest challenge that any racer can throw at them. The RT-Monster Wheel has been trail and race tested for over five years with a continued winning streak.
This wheel is not DOT approved for highway use, and it is suggested that tire pressure does not exceed 25 psi.* They are offered in 15×8, 17×8.5 and 17×9.5 with a range of bolt patterns, back spacing and center bore options.* More information on the wheel can be found at*http://bit.ly/19wkojH.
For more information on this wheel or upcoming events please go to*www.facebook.com/racelinewheels.
About Raceline Wheels®
Founded in 1996, Raceline Wheels® are competition proven wheels with multiple championships in many different racing disciplines.* Raceline Wheels® has had great success transferring this* knowledge from racing to the street, bringing the same high quality products to a full line of wheels for everyday vehicles.* Headquartered in Garden Grove, California (Orange County), Raceline Wheels® is a wheel industry leader in performance, craftsmanship, engineering and innovation. Owned by Allied wheel Components, Inc., Raceline Wheels® distributes its products through an independent distributor system in the United States and through international distributors in more than 30 countries.* For more information on Raceline Wheels®, log onto*www.racelinewheels.com.
Photo Credit: Slapstick Media
Related posts:
- Acerni Repeats ULTRA4 Win at UK’s 2013 King of The Valleys
- Raceline Wheels Monster $5,000 Bounty at 2013 King of the Hammers
- Raceline Wheels Monster $5,000 Bounty at 2013 King of the Hammers
Link
