question on adding ARB bumper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 4, 2009
Threads
9
Messages
23
after seeing someone's post where their daughter was in a crash and the ARB held up nicely i was considering getting one. My question: are they super heavy where you have to factor in suspension-type issues, or just slap it on there? i drive back and forth to colorado and it just seems inevitable i have a run-in with a deer or bighorn sheep or whatever the hell is on the side of the road. thanks!
 
i didn't think that it was particularly heavy. i put it on myself, had it all butttoned up and was drinking a beer within 30 mins too. no change in ride height either, although i do not have a winch yet.
 
X2 on ride height and ease of installation. Two people makes it a little easier to manuver into place, but it can be done solo.
 
I may be wrong, but I think the Slee looks a little more stout. I don't have either yet, and am undecided on which one I want, that is just my understanding. It obviously does not cover up as much in front. you could always go custom as well
 
Last edited:
X2 on ride height and ease of installation. Two people makes it a little easier to manuver into place, but it can be done solo.

does this assessment pertain to people like me with ZERO mechanical skills? i have trouble working the little car on a monopoly set
 
Last edited:
Some like myself had a slight misalignment problem between the frame and the ARB. I had to tap a piece of wood between the recieving ends on the ARB to get enough clearance to slide it on the frame rails. Not a big deal though. Installed it myself and other than the bumper being somewhat bulky it was quite an easy install.

Your suspension may sag slightly depending on what springs you are running, more so if you plan on installing a winch.
 
ARB Good...Deer Bad

After hitting a couple of "things", I decided to get the ARB bumper. I think it's around 70 lbs. I could have paid for the bumper with the amount of damage caused by each "run in". Now that it's installed (easy one man job with a chain hoist) I prolly won't hit anything but, hey, it's a great place to mount my aux lights, and the approach angle is much improved over the stock bumper. I could prolly climb up over a Neon without scratching the bumper. Makes a good towel rack when camping. The uses are limitless.
 
does this assessment pertain to people like me with ZERO mechanical skills? i have trouble working the little car on a monopoly set

:lol: Classic!

You will probably spend more time taking off the stock bumper than putting on the ARB...If you can discern the difference between bolt lengths and can thread a bolt into a hole and tighten it down, you shouldn't have much trouble...

Lights may be more of a challenge but the hardest part there is determining if you want the lights to blink with the blinkers and getting the corner lenses out to hook up the ARB lights. Good threads out there on "how to" including the one linked to above.

Don't count on the ARB instructions helping much unless ARB has improved things in the last couple of years...

Oh, and get the winch version. Even if you don't plan on getting a winch, I think they look better and if you ever decide to sell it IMO it will be easier to sell :)
 
Mounting an ARB is super-simple. Either a chain winch or a friend to help you lift this stout sob. I can also testify on the ARB's great ability to handle animals i.e. "big horn sheep." We don't have big horn in south Georgia, but lots of whitetail deer of which at least 2 have met their maker from injuries sustained due to impact injuries with my ARB. IMHO ARB's front end solution would prob suit your stated needs better than Slee's b/c of the increased (and higher) coverage provided by the ARB. Just my thoughts...
 
I pulled mine off and put it back on by myself. It's not real heavy, it's just the size that makes it awkward to handle

Two people would make it easier, but you can pick it up solo and slide it on to the frame rails pretty easy:meh:
 
If they can handle a Roo then a few fancy sheep will not be an issue

I have run ARB bars on all my Land Cruisers and fitting them up to all our mine vehicles (sedans, utes, Hilux/Tacoma and Land Cruiser). It was never to get better approach angles or hang accessories off. They were designed to protect a vehicle from animal strikes. Given where that are designed and built that means mainly kangaroos (throw in a few emus, sheep, cattle and a horse or 2).

Personal experience is that they will handle sheep without a problem. For larger animals they will probably protect the vehicle enough to get you home. They protect the radiator well. Anything hit on the sides generally gets pushed down and away from the center of the vehicle.

Now if you hit a moose, cow or horse you may be lucky enough drive home but don't count on it. Again personal experience in 80 series fitted with ARB bars. Many roos and the bar generally survived and I continued driving. 2 cows in a new ford sedan (think tarus size) and the bar neatly pushed them off to the sides but protected the radiator. Still drivable but every panel including the roof was dented. Horse in a HJ60 did not survive. Fan into radiator and horse on the hood. Could not get the hood open to look at the radiator. Besides my arse was puckered so tight to the seat after seeing that chunk of meat trying to get across the hood and into the cab I don't think I could of driven on anyways.
 
Back
Top Bottom