question for the hard core people

[SSTigerMerc]

I have been looking for the adapter plate to mate an sm420 to the landcruiser tranfer case any one out there have the specs on one of these so i can machine it. I would be more then happy to ship a finished one to someone who can provide specs or possibly one to reverse engineer. Please let me know.

Regards,
S. Scigo

P.S. If one is sent to reverse engineer i will pay for it so you dont have to worry about losing your investment

 

[Isotel]

i think Woody had some made for the 465. I know he made a bunch and sold them a few years back!

i don't think anyone is making one currently, so there may be a need for a few!

 

[liljlandon]

We have one that mates a 420 to a Fj40 case which should be the same, but we have absolutely no idea where and when it was put on, we bought it like that...

 

[D'Animal]

Here you go.

Look at the link on the left side for your croorect selection.

https://eshop.advanceadapters.com/commerce/ccc1043-transmission-retro-fit-adapters.htm

 

[72cruiser]

Here you go.

Look at the link on the left side for your croorect selection.

https://eshop.advanceadapters.com/commerce/ccc1043-transmission-retro-fit-adapters.htm

isn't he asking about the plate style adapter for the tranny to the tcase, not the the bellhousing/tranny adapter? (i think that your link is for the latter)

here's a link to the longer adapter (i think...) but he's after a plate adapter
https://eshop.advanceadapters.com/c...0129-gm-sm420-adapter-kit-50-2601-50-2601.htm


i could be way off on this...


malphrus

 

[SSTigerMerc]

nope youre right

you are right malphrus i am looking for the plate adapter so that i can reverse engineer it. I am going from 350 to sm420 so that is not a problem.

Regards,
S. Scigo

 

[D'Animal]

Well I didn't know the spline count but here it is. It is the link on the left of the my original AA post that says transfer case adaptors.

https://eshop.advanceadapters.com/c...0329-gm-sm420-adapter-kit-50-2603-50-2603.htm

This is for the one to adapt a SM420 to a Toyota T- Case.

isn't he asking about the plate style adapter for the tranny to the tcase, not the the bellhousing/tranny adapter? (i think that your link is for the latter)

here's a link to the longer adapter (i think...) but he's after a plate adapter
https://eshop.advanceadapters.com/c...0129-gm-sm420-adapter-kit-50-2601-50-2601.htm


i could be way off on this...


malphrus

you are right malphrus i am looking for the plate adapter so that i can reverse engineer it. I am going from 350 to sm420 so that is not a problem.

Regards,
S. Scigo

 

[72cruiser]

Well I didn't know the spline count but here it is. It is the link on the left of the my original AA post that says transfer case adaptors.

https://eshop.advanceadapters.com/c...0329-gm-sm420-adapter-kit-50-2603-50-2603.htm

This is for the one to adapt a SM420 to a Toyota T- Case.

but that's still not a plate adapter.

 

[Isotel]

he is after a Plate Adapter, they are usually made of a 3/4" chunk of aluminum!, Here is the link to woody's install, i don't know if Classic Cruisers makes the plate still..

FJ40 - SM465 and early transfer install

 

[D'Animal]

I see. I have never seen that setup before.

Sorry for the bad info from me.

FJ40 - SM465 and early transfer install

 

[awp_cruiser]

I am pretty sure that Classic Cruiser still sells the plate adapter for the 465. I don't know what the difference between a 420 and 465. In any case the plate from Classic is a quality product. Solid steel as well - not aluminum. You might be able to reverse engineer the difference on one of the 465 adapters without much wheel reinventing.

Conversions

Good luck.

Andy

 

[rabid]

EBI Cruiser Parts



used to be extreme bends, now EBI.