Pulling springs from pack

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 16, 2003
Threads
224
Messages
3,475
Location
Swanzey NH
I'm running a 4" BDS lift on my 40. No extra weight in the back. I'd like to soften up the rears a bit and plan to pull 2 leaves from the pack. I've had the springs for 3 years now and they haven't sagged any since I put them on. The BDS pack is 5 leaves, will pulling the 2 smallest ones help me any, or is it a bad idea?

Thanks!
Lane
 
I had the same springs...
and the same experience.....
I did try pulling the third leaf, the one above the one with the spring clamps, and it didn't help much. I went spring over and am very happy, but if I still had them I would try pulling that double military wrap until the springs settle some, then put it back if you need to.
PMK
 
Those BDS 4" spring are STIFF. My truck handled like a skateboard!
Look at that awsome flex....
Rubicon2.sized.jpg

and that was fully loaded for a weekend at spider lake (and one of the leafs out).
I think, beating those things into submission with a long leaf out would do them good..... then you could put it back if you needed to.
But, then again I ran them and I'm biased. SO is the only way to go.
PMK
bandy rooster said:
takin springs outta the pack is a good way to reduce the life of your springs, maybe thats just with OEM springs and not for aftermarket shtuff..

new shocks maybe?
 
Back
Top Bottom