PS line thread tape/sealer

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 29, 2003
Threads
283
Messages
2,381
Location
Louisville, KY
What do you guys typically use for sealing the PS hose threaded ends? I was told plumbers tape by the hydraulic shop.

Thanks.

Juke
 
Scott R is spot on, the flare creates the seal, if it is leaking, it could be cracked, or there could be junk in there causing it to not seal.


NO TEFLON TAPE!!!



Good luck!


-Steve
 
A good flare is correct and Poser is also right. I had PS fluid leaking everywhere. I thought I was in a world of chit. Before I jumped to conclusions, I replaced all the low pressure PS hoses. That fixed my leak.

I bet the hoses tend to wear down near the flares as the hoses I took off and the hoses I replaced them with fit very snug.
 
Thank you. My hoses are brand new. Have not even put them on yet so all is well. Will be doing that in the next few days. Thanks.

JL
 
flare should seal it, but it's common practice in the big rig shops to use pipe dope....i sealed a flare hose to an oring box with the grommet from a cb mount
 
Are all of your parts matched or are they for different applications or years? Possible fitting missmatch.
 
Aalien said:
Are all of your parts matched or are they for different applications or years? Possible fitting missmatch.



I think it was a preemptive question, I don’t think he has anything installed yet.



:beer:
 
On my mini truck PS setup I have SAE fittings permanently on the HP hose and an adapter fitting for the metric fitting on the PS box -- so I gots to use da sealer in places.

I was told by my long-experienced hydraulics guy that you should ONLY use liquid teflon sealer on ANY hydraulic fittings. The tape could get in the works and really mess things up.

Just my .02 USD. Which ain't worth much now-a-days :)

Jody.
 
Teflon tape, no matter how careful you are, WILL get into the hydraulic system and plug some small orfice somewhere that should not be plugged. This will cause endless grief accompanied by foul language and flying tools. The liquid teflon dope is the only sealant that should be used on a hydraulic system if you feel the need to use anything at all... :)

Nick
 
Back
Top Bottom