PS Grab Bar

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 15, 2005
Threads
157
Messages
980
Can a grab bar from a RHD 80 be flipped over and fit a LHD 80? :confused:
 
Since you have a '94, you will need a different handle than Mot used. The one for the 90-'94 models is different than the one for the '95-'96 models and does not flush mount becuase of the shape of the dash. The one you want actually want is angled a little at the inside (towards center of truck) mounting point of the handle and fastens to the dash at an angle. But, they actually made the handle you want for LHD 80s in some European countries, so no flipping required if you can find one. Here are the part numbers I got from the European Electronic Parts Manual:

Sable Interior: 74670-60010-06 ($24.81 ea)
Blue-Grey Inerior: 74670-60010-01 ($24.81 ea)

And the Fastenrs:
90179-06168 ($0.55 ea)

Let me know if/how it works out. Obviously, I have been looking at doing the same mod. I just haven't been able to find a U.S. supplier of the parts.
Handle.webp
Handle2.webp
 
Last edited:
I've gotten both shapes and colors before, just so you know.;)

BTW, that is a great price for the grab bar (cheaper than I can get it/them), so if you can get them for that price I would jump on it.

Mot:)
 
Mot,
Good to know. I may be calling on you for a sable one for a '94. Do you run a web site? How do I contact you for parts? Also, that price is the one quoted on the EPC, so I doubt I could actually get it for that price.
 
Since you have a '94, you will need a different handle than Mot used. The one for the 90-'94 models is different than the one for the '95-'96 models and does not flush mount becuase of the shape of the dash. The one you want actually want is angled a little at the inside (towards center of truck) mounting point of the handle and fastens to the dash at an angle. But, they actually made the handle you want for LHD 80s in some European countries, so no flipping required if you can find one. Here are the part numbers I got from the European Electronic Parts Manual:

Sable Interior: 74670-60010-06 ($24.81 ea)
Blue-Grey Inerior: 74670-60010-01 ($24.81 ea)

And the Fastenrs:
90179-06168 ($0.55 ea)

Let me know if/how it works out. Obviously, I have been looking at doing the same mod. I just haven't been able to find a U.S. supplier of the parts.

Where did you get the pricing you listed?
 
TX,
For domestically available parts (parts that came on North American 80s), use this: https://www.trademotion.com/partlocator/index.cfm?siteid=213804

For foreign parts (parts available only on European/Japanese/Australian 80s), I have found many price listings here: http://www.allworldautomotive.com/auto_parts_for_sale_toyota_diesel_parts_ots11296-59.html

I do not know how to order the foreign parts yet. I am assuming you have to contact a foreign Toyota dealer. Mot can probably answer that question better than I can. I hope that helps.
 
I think you can get some JDM (or other markets') Toyota parts from your local dealer, but not that many.

I can get them 'cuz I'm in Japan, but still hard (sometimes) to get parts intended for other parts of the globe.

Mot:)
 
Back
Top Bottom