Problem with new stereo installation!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 30, 2008
Threads
7
Messages
67
Location
San Diego, CA
I decided a month ago to replace my intire sound system on my fj80 cruiser. I had blown out speakers in the front and back doors, so I decided to go and purchase facoty toyota speakers, subs, amps, ect. at best buy. I paid them to do the installation there, and much to my dismay, they turned out to be complete hacks :frown:. The problem with our steroes now is that whenever we turn it up past a certain volume (40/100), the fuse 10 that controlls the time, ect. in the cruiser blows. I have gone through almost 6 fuses this week and am taking the cruiser up to them to try and get it fixed today. I am wondering whether I should ask them to run a seperate wire straight to the battery, or to a new fuse so as not to overload the fuse 10 which controls too much at the moment. HELP!
 
To be honest, if you have installed an amp and it runs off the normal fuse, it will blow as you turn up the volume.

My amp has a 30 amp fuse and straight to the battery, I did a write up on what I did on here, do a search on my name if you wanna have a look, has a link to photo's as well.
 
Well, I doubt you can get "factory" Toyota stuff at Best Buy, but I'm guessing you meant factory equivalent. Based on what I've read here on mud, I don't think you would want factory OEM or even factory equivalent as there are better options for less in the after-market world.

Even so, if they replaced the factory amp with anything other than a n equivalent amp (which is tiny) then you have several problems, as any sizeable amp will require very large power wire direct from the battery and will need to be fused. First, you will blow factory fuses constantly (seems to be happening). Second, you will likely have a vehicle fire if the factory amps don't blow fast enough (and possibly even if they do as you will be continually heating the wires and thereby damaging them).

My advice is

  1. Don't run the system until it is checked out (or at the very least don't run it at a high level).
  2. Consider going to someone other than Best Buy for quality advice and work.
  3. Read the FAQ here and search on stereo installs. There is a ton of information that will answer nearly all your questions.
Good luck!
 
yep, sounds like a hack installation. Tell them you'll give them one chance to fix it and then you'll be sending them a bill if they don't get it working 100%. I'm sure they'll get it right the second time... it's very simple.
What part of the wold are you in?
 
#1 rule in car audio never use a big box store to install your stuff. We need more details to tell you or even guess accurately on what is going on. I would certainly take it back to Best Buy and possibly even ask for a complete refund.
 
if you remember one thing and one thing only...remember this. DO NOT, I REPEAT, DO NOT SIGN THE RELEASE FORM FOR YOUR VEHICLE. If you did when you picked up the vehicle for the first time after install, than be super nice to the store manager and work it out. I had the jerk offs from Best Buy install a Alpine Amp and Alpine Component system in my Dodge Dakota and it was the worst install ever. I wont go into details besides wanting to punch the installers in the mouth for being so careless. I fought with Best Buy over some repairs to my actual vehicle and they pretty much told me since I picked up the vehicle and signed the release that it meant I was completely happy with the installation, and if I wasnt I shouldnt of brought it up then. Like im suppose to look over every routed wire and speaker install, and hop in the vehicle and listen to some tuneage to make sure everything is good. But apparently thats what I should of done. I fought this all the way up the food chain and it always came back to the signature of release. My only recourse is to kiss some ---- at the store and "work something out" inhouse. Best Buy never again. Good luck man and keep us posted.
 
Back
Top Bottom