Power Stering Pump Rebuild

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 1, 2006
Threads
104
Messages
573
Location
North Jersey
I'm in the process of changing my HG along with resealing the oil pans and replacing the timing chain slipper and I want to rebuild the PS pump while I have access to it. I read the rebuild thread in the FAQ but it seemed to only address a leaking unit. I have no problem with it now but during the winter after sitting all night in the teens it had that groaning whiny sound to it. Will changing all the o rings solve this or is there something more involved that needs to be addressed?

:cheers:
George
 
I'm in the process of changing my HG along with resealing the oil pans and replacing the timing chain slipper and I want to rebuild the PS pump while I have access to it. I read the rebuild thread in the FAQ but it seemed to only address a leaking unit. I have no problem with it now but during the winter after sitting all night in the teens it had that groaning whiny sound to it. Will changing all the o rings solve this or is there something more involved that needs to be addressed?

:cheers:
George

Changing the seal and o-rings will go a long ways to preventing future leaks. The cold groan is from the cold, thick fluid cavatating. The best plan to minimize cavitation is keeping the fluid fresh, in my experience the hydraulic that came in it is much less likely to cavatate, groan than ATF. I run Mobil DTE Light hydraulic oil with good results.
 
Back
Top Bottom